Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
Carefully assemble this appliance according to these instructions. Inspect contents in the box to ensure all parts are
included and undamaged. Please contact Barbour International, Inc. if any parts appear damaged, missing, or
inaccurate. Proof of purchase will be required.
Tools Required:
Cooker Parts Included:
(Not Included)
Round Frame
Adjustable
Wrench
Heat Shield
Phillips Head
Screwdriver
Burner Support Bar
To Assemble:
1. Remove components from the box and packaging.
Turn round frame upside down as shown for proper
assembly.
2. Mount Burner Support Bar: Line up holes in support
bar to the holes in the frame. Attach with four short
bolts and four locking nuts. Wrench tighten.
3. Attach Burner and Heat Shield to Support Bar:
Remove locking nut from bottom of burner. Turn burner
upside down and insert mounting bolt into center hole
of bar. Holding burner in place, position heat shield
over bolt. Attach locking nut and wrench tighten.
4. Attach Legs to Round Frame: Slide legs on frame to
match holes. Insert long bolts and attach with locking
nuts. Hand tighten.
10 PSI Hose Valve
Burner with
Regulator
Locking Nut
Air Shutter
(3x) Legs
5
(3x) Long
Bolts
(4x) Short
Bolts
(7x) Locking
Spring
Nuts
Pot Included:
Boil/Steam Stockpot
with Basket
-OR-
2-Piece Steamer Pot
Advertisement
Table of Contents
