AgaMatrix Liberty Owner's Booklet page 34

Select the preferred volume setting
with the RIGHT or LEFT arrow buttons.
Your selection will be highlighted by the
blinking of the symbol. Press the CENTER
button to confi rm your selection.
Continue to set the MENU Mode Backlight option.
[4] Setting Backlight Option
You can only enable and disable the backlight. The default
setting for the backlight is disabled. The changed status of
the backlight will be activated immediately.
Note: Disabling the backlight in the SET menu also disables
backlight for alarms.
Select the preferred setting with the
RIGHT or LEFT arrow buttons. Press
the CENTER button to confi rm and
continue on to set the Time Format
and Time.
64 Settings
[5] Setting Time
How to Get to the Time Menu:
Press and Hold any button to reach the menu mode.
The screen will display MEM.
Press the LEFT arrow once and you will see a screen
that says SET.
Press the CENTER button repeatedly to skip the
Volume and Backlight settings. When you see a
screen with the message 12H, you are ready to set the
meter's time.
Select a 12 or 24 hour clock format
with the RIGHT or LEFT arrow buttons.
The 12 hour clock display option is
indicated by a 12H. The 24 hour clock
display option is indicated by a 24H.
Your selection will be highlighted by
the blinking of either the 12H or 24H
symbols.
Press the CENTER button to confi rm
your selection and proceed to the
hour setting.
:
PM
:
PM
Settings 65