Table of Contents
Advertisement
Set (minutes) by using the RIGHT
or LEFT arrow buttons. Accelerated
change is possible by holding down
the arrow buttons. Press the CENTER
button to confi rm the alarm time and
to move on to set the alarm volume.
[5] Setting Alarm Volumes
Choose the volume of the alarm. There are three volume
options. For the silent alarm option, the meter's screen will
fl ash when an alarm goes off .
The default alarm setting is "high".
Select your preferred setting by using
the RIGHT or LEFT arrow buttons.
Confi rm your selection by pressing
the CENTER button. This will also
bring you back to the MENU Mode.
Note: The volume of an alarm can be changed by way of
the meter's setting option in the SET mode. If your meter
is set to silent mode, then the alarm will not sound, re-
gardless of the individual alarm setting. Also, if your meter
is set to low volume mode, then an alarm set for high
volume will default to low volume mode.
60 Alarms
[6] Setting Multiple Alarms
:
PM
To set other alarms, press the RIGHT or LEFT arrow buttons
until the alarm you want to set (AL1 to AL6) is displayed.
Follow the same instructions beginning on page 57.
To power OFF the meter, press and hold the CENTER but-
ton for 2 seconds. After 3 minutes of no user interaction,
the meter shuts OFF automatically.
:
PM
Navigation of MENU Mode:
Alarms
61
Advertisement
Table of Contents
