Table of Contents
Advertisement
Settings
The main steps covered in this section are:
[1] Entering MENU Mode
[2] Entering SET Option
[3] Setting Meter Volume
[4] Setting Backlight Option
[5] Setting Time Format and Time
[6] Setting Date
[7] Setting Hypo Limit
[8] Setting Hyper Limit
Note: If you want to power OFF the meter at any time,
press and hold the CENTER button for 2 seconds. After 3
minutes of inactivity, the meter shuts OFF automatically.
[1] Entering MENU Mode
Press and hold any button for 2
seconds to enter the MENU mode.
During the meter system check, all
display segments and the display
backlight will turn ON.
62
Settings
:
AM
PM
c o d e
Ketone
mmgl/dL
14
1
30
2
3
90
[2] Entering SET Option
The MEM symbol will appear. If
display backlight is enabled in
SET Options, it will remain ON
until timing out.
Press the RIGHT arrow button
until the SET symbol is displayed.
Press the CENTER button.
[3] Setting Meter Volume
There are three beep volume op-
tions. The default setting is "high".
Settings 63
Advertisement
Table of Contents
