Toshiba e-STUDIO 2010AC Operator's Manual page 49

4.TopAccess
Item name
3 Use External Server for Data
Backup
Select this check box to store backed-up data of the internal storage device in
an external server.
Enter the following items to configure the external server to store the backed-
up data of the internal storage device.
Protocol
Select the protocol to be used for storing the backed-up data of the internal
storage device in an external server.
 SMB — Select this to send the backed-up data of the internal storage device
in an external server using the SMB protocol.
 FTP — Select this to send the backed up data of the internal storage device
in an FTP server.
 FTPS — Select this to send the backed-up data of the internal storage device
to an FTP server using FTP over SSL/TLS.
 Cloud — Select this to send the backup data of the internal storage device to
the cloud.
Server Name
When you select [FTP] as the protocol, enter an FTP server name or an IP
address.
You can enter up to 64 alphanumeric characters and symbols.
Port Number(Command)
When you select [FTP] as the protocol, enter the port number to be used for
the controls. Generally, "-" is entered for the control port. When "-" is entered,
the default port number, that is set for FTP Client by an administrator, will be
used. If you do not know the default port number for FTP Client, ask your
administrator and change this option if you want to use another port number.
You can enter a value in the range within from 0 to 65535 using numbers and
hyphens (-). "-" is set as the default.
Network Path
When you select [SMB] as the protocol, enter the network path to the network
folder.
When you select [FTP] as the protocol, enter the directory in the specified FTP
server.
You can enter up to 128 alphanumeric characters and symbols.
Login User Name
Enter the log-in user name to access an SMB server or an FTP server, if
required. When you select [FTP] as the protocol, an anonymous log-in is
assumed if you leave this box blank. Enter the login user name to access an
SMB server, an FTP server, or a NetWare server, if required. When you select
[FTP] as the protocol, an anonymous login is assumed if you leave this box
blank. You can enter up to 32 alphanumerical characters and symbols other
than <, >, " (double quotation), : (colon) and ; (semicolon). A user name with
only a single space is not possible.
You can enter up to 32 alphanumerical characters and symbols other than <,
>, " (double quotation), : (colon) and ; (semicolon). A user name with only a
single space is not possible.
Password
Enter the password to access an SMB server or an FTP server, if required. You
can enter up to 32 alphanumeric characters, symbols and spaces. A single
space only can also be entered.
Retype Password
Enter the same password again for a confirmation.
Connection Test
By clicking [Execute], a connection test is performed by using the specified
network settings to check if the communications can be established.
Description
[Administration] Tab 49