Zr Chassis Power Wiring - LG ARVU053ZEA2 Engineering Manual

INSTALLATION AND LAYOUT BEST PRACTICES

ZR Chassis Power Wiring

1. Release two screws and then open the cover of the control box.
• With reference to the below wiring diagram, accurately connect the main power cords into the terminal block.
2. After inserting the power cord into the bushing, fully insert it into the terminal block for connection.
• Fix the power cords with the clamp.
• Make sure that the power cords may not be removed by pulling them.
Capacity 150 / 200 CMH
Circuit Breaker 250 V / 5 A
WARNING
This appliance must be properly grounded.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
31