INSTALLATION AND LAYOUT BEST PRACTICES
ZE / ZF Chassis Power Wiring
• Do not connect wiring of different thickness to the power terminal block (slack in the power wiring could cause abnormal heat).
• When connecting wiring which is the same thickness, connect the wiring according to the first image shown below.
Figure 27:Connecting Wiring.
Conduit Connection
1. Set the connecting cable into the terminal block of the indoor unit
and tighten the screw to lock the conduit bracket to the indoor unit.
2. Join the conduit and the conduit bracket together.
3. Use the elbow type (L-Type) conduit.
Figure 29:Using L-Type Conduit.
Lock nut
Conduit
bracket
Conduit
30
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Figure 28:Conduit Connection.
Cord Clamp
Lock nut
Conduit
bracket
Conduit
Lock nut
Conduit
bracket
Conduit