Table of Contents
Advertisement
Quick Links
Printed Matter No. 9839 1477 01
Publication Date 2018-11-14
Valid from Serial No. A0770001
D2160-Q (2400 r/min)
Read all safety warnings and instructions
Failure to follow the safety warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference
8421041020
WARNING
D2160-Q
Product Instructions
Straight drill
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Atlas Copco D2160-Q
Summary of Contents for Atlas Copco D2160-Q
- Page 1 Printed Matter No. 9839 1477 01 Straight drill Publication Date 2018-11-14 Valid from Serial No. A0770001 Product Instructions D2160-Q (2400 r/min) 8421041020 WARNING Read all safety warnings and instructions Failure to follow the safety warnings and instructions may result in electric shock, fire and/or serious injury.
-
Page 2: Table Of Contents
Rust protection and cleaning ............... 10 Lubrication guide ................. 10 Maintenance and lubrication.............. 11 Dismantling/Assembling instructions .............. 11 Instructions for vane motor .............. 11 Assembly of vane motor according to Bäckströms method.... 14 Troubleshooting.................... 15 Troubleshooting .................... 15 Recycling ....................... 16 Recycling instruction.................. 16 © Atlas Copco Industrial Technique AB - 9839 1477 01... -
Page 3: Product Information
■ Damage to parts that occurs as a result of inadequate maintenance or performed by parties other than Atlas Copco or their Certified Service Partners during the warranty period is not covered by the warranty. ■ To avoid damage or destruction of tool parts, service the tool according to the recommended mainte- nance schedules and follow the correct instructions. -
Page 4: Website
You can find information concerning our products, accessories, spare parts and published matters on our website. Safety Data Sheets MSDS/SDS The safety data sheets describes chemical products sold by Atlas Copco. For more information, consult the website: www.atlascopco.com/sds Country of origin Please refer to the information on the product label. -
Page 5: Service Recommendations
Make sure to perform a preventive maintenance every 6 months. If it is used in heavy duty conditions or not running properly, it should be removed from operation for inspection more often. © Atlas Copco Industrial Technique AB - 9839 1477 01... -
Page 6: Installation
Air quality ■ For optimum performance and maximum product life we recommend the use of compressed air with a maximum dew point of +10°C (50°F). We also recommend to install an Atlas Copco refrigeration type air dryer. ■ Use a separate air filter which removes solid particles larger than 30 microns and more than 90% of liquid water. -
Page 7: Installation Instructions
Connect the tool to the air supply. Use the appropriate drilling speed for the application. To start the tool, press the trigger. When lubrication is recommended - only use lubricants recommended by Atlas Copco. © Atlas Copco Industrial Technique AB - 9839 1477 01... -
Page 8: Operation
Drain the hose of air pressure and disconnect the tool from air supply when not in use or before ► any adjustments. Always use the correct hose size and air pressure for the tool. ► © Atlas Copco Industrial Technique AB - 9839 1477 01... - Page 9 10. If the drill gets caught in the material, release the trigger immediately, unplug the drill and remove the bit from the material. When lubrication is recommended - only use lubricants recommended by Atlas Copco. © Atlas Copco Industrial Technique AB - 9839 1477 01...
-
Page 10: Service
The air inlet is equipped with a strainer. If this is punctured, foreign objects may harm the valves, resulting in overspeed. Lubrication guide Brand General purpose, Bearings and Gears Energrease LS-EP2 Castrol OBEEn UF 1 Esso Beacon EP2 © Atlas Copco Industrial Technique AB - 9839 1477 01... -
Page 11: Maintenance And Lubrication
PTFE-particles must not come in contact with open fire, glow or heat ► Motor components must be washed with cleaning fluid and not blown clear with an air line ► Wash your hands before starting any other activity ► Dismantling © Atlas Copco Industrial Technique AB - 9839 1477 01... - Page 12 4080 0182 09 17.5 4080 0182 10 20.5 4080 0182 11 25.5 4080 0182 12 30.5 4080 0182 13 35.5 4080 0182 14 40.5 Dismantling tool Mandrel A Inspection of motor parts © Atlas Copco Industrial Technique AB - 9839 1477 01...
- Page 13 4080 0567 03 21.5 4080 0567 07 25.5 10.5 4080 0567 08 27.5 12.5 4080 0567 09 31.5 15.5 4080 0567 10 34.5 18.5 Dismantling tool Mandrel B E: Ball bearing © Atlas Copco Industrial Technique AB - 9839 1477 01...
-
Page 14: Assembly Of Vane Motor According To Bäckströms Method
Service D2160-Q Assembly of vane motor according to Bäckströms method © Atlas Copco Industrial Technique AB - 9839 1477 01... -
Page 15: Troubleshooting
Make sure that the amount of ing. grease is correct. Damaged gear. Worn motor bearings. *) This service must only be carried out by authorized workshop or qualified service technician. © Atlas Copco Industrial Technique AB - 9839 1477 01... -
Page 16: Recycling
When a product has served its purpose it has to be recycled properly. Dismantle the product and recycle the components in accordance with local legislation. Batteries shall be taken care of by your national battery recovery organization. © Atlas Copco Industrial Technique AB - 9839 1477 01... - Page 20 Original instructions Atlas Copco Industrial © Copyright 2018, Atlas Copco Industrial Technique AB. All rights reserved. Any Technique AB unauthorized use or copying of the contents or part thereof is prohibited. This SE-10523 STOCKHOLM applies in particular to trademarks, model denominations, part numbers and drawings.
Need help?
Do you have a question about the D2160-Q and is the answer not in the manual?
Questions and answers