ELNA eXtend covermax Instruction Manual page 25

z
w
x
r
c
v
q
e
t
y
u
Threading preparation
NOTE:
Raise the top cover stitch spreader when using the
built-in needle threader.
z Raise the needle to the highest position by turning
the handwheel toward you to match the mark on the
machine with the setting mark on the handwheel.
q Handwheel
w Mark
e Setting mark
x Raise the presser foot lifter.
r Presser foot lifter
c Turn the fine mode switching lever to STD. to sew the
top cover stitch.
t Fine mode switching lever
v Insert a piece of scrap fabric.
Lower the presser foot lifter and sew 3 to 5 cover
stitches.
Raise the needle to the highest position by turning
the handwheel toward you to match the mark on the
machine with the setting mark on the handwheel.
Raise the presser foot lifter.
Lower the top cover stitch lever to set the top cover
stitch spreader.
y Top cover stitch lever
u Top cover stitch spreader
23