ELNA eXtend covermax Instruction Manual page 20

(A)
,
!1
(B)
,
(C)
,
.
!2
!3
.
.
, Thread each needle as follows:
Left Needle (A):
Pass the thread behind the thread guide plate from
the left. Pass the thread between the first and second
prongs from the left.
!1 Thread guide plate
!2 Prongs
!3 Needle bar thread guide
Center needle (B):
Pass the thread behind the thread guide plate from
the right. Pass the thread between two inner prongs.
Right needle (C):
Pass the thread behind the thread guide plate from the
right. Pass the thread between the first and second
prongs from the right.
. Slip all the threads behind the needle bar thread guide
from the right.
⁄0 Thread each needle with the threader (refer to "Built-in
Needle Threader" on pages 19-20).
18