Table of Contents
Advertisement
q
e
z x
c
Memory buttonholes
w
Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r
r Foot pressure:
z Pull the button holder all the way out.
x Mark the buttonhole position on the fabric.
c Sew the left side up to the required buttonhole length
q
60
24
AUTO
Automatic buttonhole foot R or
Satin stitch foot F
5
NOTE:
Use satin stitch foot F where the automatic buttonhole
foot R cannot be used.
NOTE:
You do not need to pull down the buttonhole lever.
If you wish to sew a buttonhole longer than the size
permitted by the automatic buttonhole foot R, use
satin stitch foot F.
Place the fabric under the foot, and lower the needle
at the starting point.
Lower the foot and start sewing while pulling the
needle thread lightly to the left. After sewing a few
stitches, free the thread and continue sewing.
and stop the machine. Then press the reverse button.
q Reverse button.
Advertisement
Table of Contents
