Table of Contents
Advertisement
AXIS Audio Manager Pro C7050 Mk III
Set up paging
Set up paging
Before you set up paging, you should prepare the destinations you want to use. A destination contains the zones and devices that
the paging will be sent to.
If you want to page an announcement, you must first create a playlist containing one or several audio files.
•
For instructions about how to create destinations and playlists, see Schedule announcements on page 10.
Paging with a 2N SIP Mic
1. Set up a SIP server:
1.1 Go to
1.2 Click + SERVER.
1.3 Name the SIP server.
1.4 Enter the domain name or IP address of your server.
1.5 Click CREATE.
2. Set up a SIP client for your 2N SIP Mic:
2.1 Click
2.2 Go to CLIENTS.
2.3 Click + CLIENT.
2.4 Name the client.
2.5 Enter a user ID.
2.6 Enter credentials for authentication.
2.7 Click CREATE.
3. Configure the 2N SIP Mic:
3.1 Go to the 2N SIP Mic interface.
-
The interface is reached by entering the IP address for the mic in a web browser.
3.2 Go to VoIP > SIP Proxy account.
3.3 Under Caller ID, enter the user ID you used for the client.
3.4 Turn on Use SIP account.
3.5 Under SIP Proxy address, enter the server IP address or domain name.
3.6 Turn on Use registration.
3.7 Under Registration server address, enter the server IP address or domain name.
3.8 Enter the credentials you used for authentication in your SIP client.
3.9 Click APPLY.
SIP settings.
for the SIP server.
15
Advertisement
Table of Contents
