Frameless Door Option; Application With Sliding Door Icms - FRIGOGLASS Super-5 [R600a] Manual

ENG
To unblock the Door:
Step 1: Open the door slightly greater than 90 degrees and remove the door blocker manually from
bracket located at front grid
Step 2: Rotate the door blocker towards door and snap fit in bracket below the door (Initial position)
6.2

Frameless door option

To block the door, just open the door to an angle
6.3

Application with sliding door ICMs

Step 1: Open the left door (same procedure also for right door)
Step 2: Lift up and rotate the door blocker towards the cabin (as shown in the picture)
Step 3: Place door blocker vertical to door guides (as shown in the picture). Door blocker will be
blocked at door guides walls and prevent the door to close.
Step 4: Release the door blocker from the stopping point and rotate to the initial position
12
Automatic removal of door blocker from bracket located at front grid is
for accidental purpose only.
Step 1 Step 2-3
slightly grea ter than 110 degrees.