Table of Contents
Advertisement
The Wok Cradle
The wok cradle is designed to fit a 35 cm wok. If you use a
different wok, make sure that it fits the cradle. Woks vary very
widely in size and shape. It is important that the wok sits
down on the pan support – however, if the wok is too small,
the cradle will not support it properly (Fig. 2.9).
The cradle should be used on the wok burner only. When you
fit the cradle, make sure that it is supported properly on a pan
support and the wok is sitting level in the cradle (Fig. 2.10).
The cradle will get very hot in use – allow plenty of time for it
to cool before you pick it up.
The Griddle
The griddle fits the left-hand well, front to back (Fig. 2.11).
It is designed for cooking food on directly. DO NOT use pans
of any kind on it. The griddle surface is non-stick and metal
cooking utensils (e.g. spatulas) will damage the surface. Use
heat resistant plastic or wooden utensils.
Do not put it crossways – it will not fit properly and
n
will be unstable.
Do not put it on any other burner – it is not designed
n
to fit in any of the other cooker wells.
Remove the left-hand pan support. Position the griddle over
the well. Check that it is securely located.
The griddle can be lightly brushed with cooking oil before
use. Light the hotplate burners. Adjust the flame heights to
suit.
Preheat the griddle for a maximum of 5 minutes before
adding food. Leaving it longer may cause damage. Turn the
control knobs towards the low position, marked with the
small flame symbol, to reduce the burner flames.
Always leave space around the griddle for the gases to
escape.
After cooking, allow the griddle to cool before cleaning.
If the griddle is washed in a dishwasher then some
dishwasher residue may appear on the back. This is normal
and will not affect the performance of your griddle.
ArtNo.311-0006 Correct wok sizes
ArtNo.311-0007 Wok stand close-up
9
ArtNo.311-0044 - Positioning the griddle 09
Fig. 2.9
Fig. 2.10
Fig. 2.11
Advertisement
Table of Contents
