Apis; Sample Application Description; Smartag2 Application Description; Figure 3. Fp-Sns-Smartag2 Terminal Setting - ST STM32Cube User Manual
Function pack for steval-smartag2 evaluation board with dynamic nfc tag, environmental, motion, and ambient light sensors
Hide thumbs
Also See for STM32Cube:
- Quick start manual (66 pages) ,
- Integration manual (49 pages) ,
- Quick start manual (31 pages)
Table of Contents
Advertisement
1.4
APIs
Detailed user-API technical information with full function and parameter descriptions is available in a compiled
HTML file in the package "Documentation" folder.
1.5
Sample application description
The sample applications available for the
•
SmarTag2
•
SimpleBootLoader
•
FirmwareUpdate
Ready-to-build projects are available for multiple IDEs.
1.5.1
SmarTag2 application description
You can set up a terminal window for the appropriate UART communication port in order to control the
initialization phase, as shown in the figure below.
Note:
To enable/disable this UART functionality on the STEVAL-SMARTAG2 board, you must recompile the code by
uncommenting/commenting the line:
#define SMARTAG2_ENABLE_PRINTF
in the Projects\ STM32L4P5CE-SmarTag2\Examples\SmarTag2\Inc\SMARTAG2_config.h file.
UM3073 - Rev 1
STEVAL-SMARTAG2
Figure 3.
FP-SNS-SMARTAG2 terminal setting
evaluation board are:
UM3073
APIs
page 4/42
Advertisement
Table of Contents
Need help?
Do you have a question about the STM32Cube and is the answer not in the manual?