Handling The Lvds Ffc Connector - Sony KDL-40NX725 Service Manual

HANDLING THE LVDS FFC CONNECTOR

DISCONNECTING THE LVDS FFC CONNECTOR
1. Gently press down on the release tabs of the connector slot.
2. Holding onto the entire LVDS FFC Connector,
pull out the connector while continuing to hold down
the release tabs of the connector slot.
(See caution below.)
Remove
connector.
2
Main Board
Use caution when you connecting or removing the LVDS FFC Connector.
DO NOT remove the connector by the reinforcement tab only.
Correct
KDL-40NX725/55NX725/60NX725
SECTION 1 - SAFETY AND FEATURES
Press down
Press down
Incorrect
CONNECTING THE LVDS FFC CONNECTOR
1. Holding onto the entire LVDS FFC Connector,
insert the LVDS FFC Connectorinto the connector slot.
Insert
connector.
Main Board
CAUTION: The LVDS FFC Connector can be inserted into the Main Board upside down.
If it is inserted upside down, the pins on the LVDS FFC Connector
will short-circuit and damage the board.
Inserted Correctly Inserted Incorrectly
3