This TV supports DiSEqC 1.0. This TV is not intended for controlling motorized antennas. Notice for Wireless Signal 1. Hereby, Sony, declares that this unit is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. To obtain the declaration of conformity (DoC) for R&TTE Directive, please access...
• Some people may experience discomfort (such as eye strain, fatigue, or nausea) while watching 3D video images or playing stereoscopic 3D games. Sony recommends that all viewers take regular breaks while watching 3D video images or playing stereoscopic 3D games. The length and frequency of necessary breaks will vary from person to person.
• The LCD screen contains a small amount of liquid crystal. Some fluorescent tubes used in this TV set also contain mercury (except for LED backlight LCD TV). Follow your local ordinances and regulations for disposal. • Do not subject the LCD screen to any strong impact or shock.
Table of Contents Getting Started Checking the accessories ... 8 Inserting batteries into the remote... 8 1: Attaching the Table-Top Stand ... 9 2: Adjusting the viewing angle of the TV ... 10 3: Connecting an antenna (aerial)/Set Top Box/recorder (e.g. DVD recorder) ... 11 4: Connecting audio/video devices ...
After setting up your BRAVIA TV and learning basic operations with this manual, see the built-in manual (i-Manual) for further explanation of the features of your TV. This TV has a built-in manual (i-Manual). To access the i-Manual, press i-MANUAL on the remote, and select an item. For details, see page 20 of this manual.
Assembling screws for Table-Top Stand (M6 x 14) (4) (KDL-60/55/46NX725, KDL-55/46HX925, KDL-55/46HX825 only) Assembling screws for Table-Top Stand (M6 x 14) (3) (KDL-40NX725 only) Hexagon wrench (1) AV/Component Adapter (1) SCART Adapter (1) Camera and Microphone Unit (1) (KDL-55/46HX925 only)
1: Attaching the Table-Top Stand For KDL-55/46HX925, KDL-55/46HX825, KDL-55/46/40NX725 Refer to the supplied Table-Top Stand leaflet for proper attachment for some TV models. Place the TV set on the Table-Top Stand. Guide pins • Align the TV from the top, slide it in until the guide pins cannot be seen.
Detaching the Table-Top Stand from the TV To detach the Table-Top Stand from the TV, remove the screws fixed in step 3. For KDL-60NX725, be sure to remove the screws for detaching the head when the Table-Top Stand is not attached to the TV. •...
3: Connecting an antenna (aerial)/Set Top Box/ recorder (e.g. DVD recorder) • Use an antenna cable connector no greater than 14 mm in thickness. • Use an HDMI cable connector within 12 mm (thickness) × 21 mm (width). Connecting a Set Top Box/recorder (e.g.
4: Connecting audio/video devices AV/Component adapter (supplied) Audio/video device 5: Preventing the TV from toppling over Install a wood screw (4 mm in diameter, not supplied) in the TV stand. Install a machine screw (M4, not supplied) into the screw hole of the TV. Tie the wood screw and the machine screw with a strong cord (not supplied).
6: Bundling the cables • Before bundling the cables, remove the cable holder from the AC cover (see step 1 and 2). Reuse the cable holder (see step 3) to bundle the other cables (see step 4). • Do not bundle the AC power cord (mains lead) together with other cables.
Satellite Auto Tuning: The following procedures may be required depending on the area: Please select “Preferred Satellite” or “General Satellite”. For “Preferred Satellite”, select your preferred operator. “Satellite Auto Tuning” automatically tunes in available satellite channels. Digital Satellite Equipment Control (DiSEqC) 1.0 management allows setting of up to four different channels.
Page 15
Digital Auto Tuning: When you select “Cable”, we recommend that you select “Quick Scan” for quick tuning. Set “Frequency” and “Network ID” according to the information supplied from your cable provider. If no channel is found using “Quick Scan”, try “Full Scan” (though it may take some time).
Using Your BRAVIA TV Watching the TV GUIDE • The number 5, N, PROG + and AUDIO buttons on the remote have a tactile dot. Use the tactile dots as a reference when operating the TV. Turn on the TV. Switch ENERGY SAVING switch on ( Press 1 on the TV to turn on the TV.
Page 17
Parts and controls of the remote Use the supplied remote to control your TV. Basic remote operations are explained here. For details on all of the remote function, press i-MANUAL and see the built-in manual (i-Manual) (page 20). Rear of Remote Control 1 :/1 Press to turn the TV on and off from standby mode.
Selecting various functions and settings (Home Menu) You can select all the features from the Home menu. See page 19 for the Home menu map. 1, 3 Press HOME. Press F/f/G/g/ to select items. To select items in the Home menu (e.g., selecting “Settings”) 1 Press G/g to select “Settings”.
Page 19
Home menu map After pressing HOME on the remote, following icons are displayed as categories. The categories are available depending on your TV model, region, country and broadcasting conditions. Media Inputs Favourites/History Settings Widgets Applications Qriocity Internet Content Recommendations Recordings You can select a list of TV channels, or a programme guide.
Displaying Operating Instructions (i-Manual) Operating instructions are built into your BRAVIA TV and can be displayed on the screen. To learn more about your TV features, access your i-Manual with the touch of a button. Press i-MANUAL. Press F/f/G/g/ to select items. To select items in the i-Manual 1 Press F/f to select an item.
Page 21
Description of the i-Manual screen To use the bookmark The i-Manual has a bookmark function. Pages can be bookmarked with coloured buttons, according to the instructions at the bottom of the screen. To access your registered bookmarks, go to the top page of the i-Manual and select “Bookmarks”.
Network Setup When you connect this TV to the Internet, you can enjoy multiple functions: displaying a photograph that shows its location on the map, enjoying Internet video, etc. For details on the functions, refer to the i-Manual. • You will need to contract with an Internet service provider to connect to the Internet.
Setting up the Internet connection Using the network feature you can connect the TV to the Internet. The set-up procedure differs depending on the type of network and LAN router. Before setting up the Internet connection, be sure to set up a LAN router. Check your wireless LAN environment using the following chart.
Type 3: Unsecured network with any type of wireless LAN router To set up a wireless LAN, SSID (wireless network name) will be required. Press HOME, then select “Network” > “Network Set-up”. Select “Wireless Set-up”. Select “Scan”, then select a network from the list of scanned wireless networks.
Press 1 on the TV to turn it off, disconnect the AC power cord (mains lead), and inform your dealer or Sony service centre of how the indicator flashes (number of flashes). When the 1 (standby) indicator is not flashing, check the items in the tables as follows.
Specifications System Panel system LCD (Liquid Crystal Display) Panel TV system Analogue: Depending on your country/area selection: B/G/H, D/K, L, I, M Digital: DVB-T/DVB-C Satellite: DVB-S/DVB-S2 Colour/video system Analogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video input) Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4 Channel coverage Analogue: VHF: E2–E12/UHF: E21–E69/CATV: S1–S20/HYPER: S21–S41...
Page 27
108.4 × 69.4 × 25.5 cm 108.3 × 66.3 × 2.7 cm 108.4 × 66.3 × 2.7 cm 21.1 kg 20.1 kg 16.8 kg 15.8 kg SU-WL500 SU-B401S (KDL-40NX725) 55NX725 28.2 kg 23.1 kg 40NX725 Approx. 101.6 cm/ 40 inches 66.0 W...
Installing the Accessories (Wall-Mount/Wall-Hanging Bracket) To Customers: For product protection and safety reasons, Sony strongly recommends that installing of your TV be performed by Sony dealers or licensed contractors. Do not attempt to install it yourself. To Sony Dealers and Contractors: Provide full attention to safety during the installation, periodic maintenance and examination of this product.
Page 29
SU-WH500 Refer to the Instructions supplied with the SU-WH500 Wall-Hanging Bracket to properly carry out the installation. × × Support Belt Screw • With the screen of the TV facing down, attach the SU-WH500 accessories. • It is unnecessary to attach the Cushions supplied with SU-WH500. (3-1 in “Installation” of SU-WH500 Instructions) •...
Attach the Mounting Bracket and the Lock Bracket. (4-3 through 4-7) Refer to the instruction manual provided with the Wall-Mount Bracket. Prepare the paper template. (5-2) 1. Refer to the following “TV installation dimensions table” and mark the TV outline on the template.
Page 31
SU-WL500 Screw location When installing the Mounting Hook on the TV installation dimensions table 1 SU-WH500 Screen centre point 2 SU-WL700 Screen centre point Hook location When installing the TV onto the Base Bracket. (Continued)
Page 32
3 SU-WL500 Screen centre point Display Screen centre Model dimensions dimension Name KDL- 60NX725 140.5 84.4 32.7 55HX925 127.8 77.1 29.9 55HX825 128.0 77.4 29.7 55NX725 128.1 77.4 29.7 46HX925 108.1 66.0 24.3 46HX825 108.3 66.3 24.2 46NX725 108.4 66.3 24.2 40NX725 94.9...
• Leave space around the TV set as shown below. • It is strongly recommended that you use a Sony wall-mount bracket in order to provide adequate air-circulation. Installed on the wall 30 cm 10 cm...
Turn off the TV set and unplug the mains lead immediately if any of the following problems occur. Ask your dealer or Sony service centre to have it checked by qualified service personnel. When: – Mains lead is damaged.
Need help?
Do you have a question about the Bravia KDL-40NX725 and is the answer not in the manual?
Questions and answers