Handling The Ffc Connector - Sony KDL-32EX725 Service Manual

HANDLING THE FFC CONNECTOR

DISCONNECTING THE FFC CONNECTOR
1. Gently press down on the release tab of the connector slot.
2. Holding onto the reinforcement tab of the FFC connector,
pull out the connector while continuing to hold down
the release tab of the connector slot.
(See caution below.)
Use the
tab to
2
remove
connector.
Use caution when you connecting or removing the FFC connector.
Remove the connector by the reinforcement tab only.
Correct
KDL-32EX725/40EX725/55EX725
SECTION 1 - SAFETY AND FEATURES
Press down
Main Board
Incorrect
CONNECTING THE FFC CONNECTOR
1. Holding onto the reinforcement tab,
insert the FFC connector into the connector slot.
Use the
tab to
insert
connector.
Main Board
CAUTION: The FFC connector can be inserted into the Main Board upside down.
If it is inserted upside down, the pins on the FFC connector
will short-circuit and damage the board.
Reinforcement tab shows
Inserted Correctly
Terminal side shows
Inserted Incorrectly
3