Sony KDL-40NX725 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. TV
  5. BRAVIA KDL-40NX725
  6. Service manual
Sony KDL-40NX725 Service Manual

Sony KDL-40NX725 Service Manual

Hide thumbs Also See for KDL-40NX725:
Table of Contents

Advertisement

Quick Links

Download this manual
HISTORY INFORMATION FOR THE FOLLOWING MANUAL:
SERVICE MANUAL
MODEL
KDL-40NX725
KDL-55NX725
KDL-60NX725
ORIGINAL MANUAL ISSUE DATE: 4/2011
REVISION DATE
4/27/2011
9-888-425-51
COMMANDER
RM-YD062
RM-YD062
RM-YD062
CONFIDENTIAL
ELECTRICAL SERVICE MANUAL
INTERNAL ONLY
SUBJECT
No revisions or updates are applicable at this time.
AZ2-F
DESTINATION
LEVEL
BRAZIL
CONFIDENTIAL
BRAZIL
BRAZIL
LCD DIGITAL COLOR TV
CHASSIS
3

Advertisement

Table of Contents
loading

Related Manuals for Sony KDL-40NX725

Summary of Contents for Sony KDL-40NX725

  • Page 1 HISTORY INFORMATION FOR THE FOLLOWING MANUAL: AZ2-F SERVICE MANUAL CHASSIS MODEL COMMANDER DESTINATION LEVEL KDL-40NX725 RM-YD062 BRAZIL CONFIDENTIAL KDL-55NX725 RM-YD062 BRAZIL KDL-60NX725 RM-YD062 BRAZIL CONFIDENTIAL ELECTRICAL SERVICE MANUAL INTERNAL ONLY ORIGINAL MANUAL ISSUE DATE: 4/2011 REVISION DATE SUBJECT 4/27/2011 No revisions or updates are applicable at this time.

  • Page 2: Table Of Contents

    BATL Board Schematic Diagram (11 of 12) ..............................25 BATL Board Schematic Diagram (12 of 12) ..............................26 G4 Board Schematic Diagram (KDL-40NX725 Only) (Page 1 of 2) ......................... 29 G4 Board Schematic Diagram (KDL-40NX725 Only) (Page 2 of 2) ......................... 30 G6 Board Schematic Diagram (KDL-55NX725/60NX725 Only) ........................

  • Page 3: Safety-Related Component Warning

    KDL-40NX725/55NX725/60NX725 SAFETY-RELATED COMPONENT WARNING There are critical components used in LCD color TVs that are important for safety. These components are identified with shading and mark on the schematic diagrams and the electrical parts list. It is essential that these critical parts be replaced only with the part number specified in the electrical parts list to prevent electric shock, fire, or other hazard. NOTE: Do not modify the original design without obtaining written permission from the manufacturer or you will void the original parts and labor guarantee. USE CAUTION WHEN HANDLING THE LCD PANEL When repairing the LCD panel, be sure you are grounded by using a wrist band. When installing the LCD panel on a wall, the LCD panel must be secured using the 4 mounting holes on the rear cover. • Avoid contact with water as it may a short circuit within the module. To avoid damaging the LCD panel: Ú do not press on the panel or frame edge to avoid the risk of electric shock.
  • Page 4 KDL-40NX725/55NX725/60NX725 The circuit boards used in these models have been processed using Lead Free Solder. The boards are identified by the LF logo located close to the board designation e.g. H1 etc [ see example ]. The servicing of these boards requires special precautions to be taken as outlined below.

  • Page 5: Safety Check-Out

    KDL-40NX725/55NX725/60NX725 SAFETY CHECK-OUT The AC leakage from any exposed metal part to earth ground and After correcting the original service problem, perform the following from all exposed metal parts to any exposed metal part having a safety checks before releasing the set to the customer: return to chassis, must not exceed 0.5 mA (500 microamperes). Leakage current can be measured by any one of three methods. 1. Check the area of your repair for unsoldered or poorly soldered connections. Check the entire board surface for solder splashes and 1. A commercial leakage tester, such as the Simpson 229 or RCA bridges. WT-540A. Follow the manufacturers’ instructions to use these instructions. 2. Check the interboard wiring to ensure that no wires are “pinched” or touching high-wattage resistors. 2. A battery-operated AC milliampmeter. The Data Precision 245 digital multimeter is suitable for this job. 3. Check that all control knobs, shields, covers, ground straps, and mounting hardware have been replaced. Be absolutely certain that you have replaced all the insulators. 3. Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC voltmeter. The “limit” indication is 0.75 V, so analog meters must have an accurate low voltage scale. 4. Look for unauthorized replacement parts, particularly transistors, The Simpson’s 250 and Sanwa SH-63TRD are examples of that were installed during a previous repair. Point them out to the passive VOMs that are suitable. Nearly all battery-operated digital customer and recommend their replacement. multimeters that have a 2 VAC range are suitable (see Figure A). 5. Look for parts which, though functioning, show obvious signs of deterioration. Point them out to the customer and recommend their How to Find a Good Earth Ground replacement.

  • Page 6: Section 1: Diagrams

    KDL-40NX725/55NX725/60NX725 SECTION 1: DIAGRAMS 1-1. CIRCUIT BOARDS LOCATION BATL SWITCH WIRELESS UNIT TCON LAN CARD HLT2 HEM2 CAMERA MODULE Figure 1-1. KDL-40NX725 ONLY BATL SWITCH WIRELESS UNIT TCON LAN CARD HLT2 HEM2 CAMERA MODULE Figure 1-2. KDL-55NX725/60NX725 ONLY KDL-40NX725/55NX725/60NX725...

  • Page 7: Printed Wiring Boards And Schematic Diagrams Information

    KDL-40NX725/55NX725/60NX725 1-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS INFORMATION All capacitors are in μF unless otherwise noted. pF : μμF 50WV Voltages are DC with respect to ground unless otherwise noted. or less are not indicated except for electrolytics and tantalums.
  • Page 8 KDL-40NX725/55NX725/60NX725 Terminal name of semiconductors in silk screen REFERENCE INFORMATION printed circuit ( RESISTOR CAPACITOR Circuit Device Printed symbol Terminal name : RN METAL FILM : TA TANTALUM Collector : RC SOLID Transistor : PS STYROL Emitter Base : FPRD NONFLAMMABLE CARBON...

  • Page 9: Block Diagrams

    KDL-40NX725/55NX725/60NX725 1-3. BLOCK DIAGRAMS IC4601 OPTICAL TUNER AUDIO OUT VIDEO 1 CVBS ANALOG AUDIO VIDEO 2 CVBS/COMP HDMI 1 IC9000 IC5500 WIRELESS TRANSMITTER HDMI 2 HDMI LAN CARD DECODER SWITCH HDMI 3 VIDEO HEM2 PROCESS HDMI 4 PC HD15 EITHERNET LVDS USB2.0...
  • Page 10 KDL-40NX725/55NX725/60NX725 Ether USB1 DiSEqC_Out X’tal 27MHz USB2 H Con. TCON DiSEqC_In Silicon [LNBH23] Zero-IF Satellite Satellite Tuner Ext Demod IFAGC Cable I2CB [HORUS3] [SEKITO2] DDR3 USB4 Current Current USB3 DMD_CLK_ENABLE2 –1333 Limit Limit PEL3 DMD_CLK_ENABLE1 Wifi [TPS2553DBV] [TPS2553DBV] DMD_RST Current X’tal...

  • Page 11: Connector Diagrams

    40"=2.1ch 6pin 0-844-427-01 JST PBVP-06V 40"=2.1ch CN4602 6pin 0-844-174-01 JST SM06B-PBVSS-TB(LF)(SN) 32"=2.0ch 4pin 0-844-426-01 JST PBVP-04V 32"=2.0ch CN4601 4pin 0-844-173-01 JST SM04B-PBVSS-TB(LF)(SN) SPEAKER Fron t (40"Onl y) SPEAKER ASSIST (40"O nly) Refer to Sheet [ App endix_SP_Connector ] 40"=2.1ch , 32"=2.0c h KDL-40NX725 ONLY (PAGE 1 OF 2) KDL-40NX725/55NX725/60NX725...
  • Page 12 1-822-908-11 VLED_GND Energy_Saving_SW VLED_GND AC(N)-IN VLED_GND VLED_GND AC(L)-IN CN6002(40" G4BW /32" G10AW) LD_ERR SFP79-02WLB JAM ES SW 1-822-908-11 GL_CTRL LED_ON Energy_Saving_SW CN1002 AC(L)-OUT 0-844-177-01 AC(N)-OUT SM12B-PBVSS-TB(LF)(SN) CN6003(40" G4BW /32" G10AW) SFP79-02WLB JAM 1-822-908-11 KDL-40NX725 ONLY (PAGE 2 OF 2) KDL-40NX725/55NX725/60NX725...
  • Page 13 (Only Interface between board and board) T-con Board(PEL3) LD Board CN03 BAT-L board LOGO module To BAT LED FFC 15pin SONY LOGO illumination module Panel_Ctrl3 / T_TD_HSYNC PANEL FFC CN04 SLCD : 96pin 1-820-181-11 SHARP : 80pin LED FFC Panel_Ctrl5 / LR_FLAG(For Asura)
  • Page 14 KDL-40NX725/55NX725/60NX725 (Only Interface between board and board) T-con Board(PEL3) HEM2 Board JST(VA) t t i 1-842-566-11 TC-EM Harness GLS_CTRL PEL3-HEM2 GLS_CTRL2 EMI_FAIL 1-821-135-11 BAT-L board Molex 1-842-558-11 STBY_+3.3V LD Board MODE_TVM VLED_VCC VLED_VCC TL-EX1JIG board CN6101 SJM20-28WLB VLED_VCC To B board (100106)

  • Page 15: Schematics And Supporting Information

    SW_KEY T_PANEL_SEL STBY_+3.3V CL9207 C9025 ASPECT1 STBY_ADC_IN_6 ICC_TRST STBY_+3.3V SW GND PANEL_PWR_DET CL9208 BDR_KEY2 STBY_ADC_IN_7 ICC_TDI STBY_LED HMS DET/SONY LOGO CL9005 GND_D PANEL_PWR_DET STBY_ADC_IN_8 ICC_TDO HMS 5V /LOGO 5V GND_D STBY_ADC_IN_9 HMS GND/LOGO GND BACKLIGHT_MON *CN9006 — GND_D R9140 R9141...

  • Page 16: Batl Board Schematic Diagram (2 Of 12)

    KDL-40NX725/55NX725/60NX725 BATL BOARD SCHEMATIC DIAGRAM (2 OF 12) — — — R1808 — 41MHz X1801 STREAM(TS)/DMD CL9300 M_TSI_CLK TSI_CK FE_XO CL9301 M_TSI_EN TSI_EN FE_XI CL1851 CL9302 CVBS_COIN_V C1809 C1814 M_TSI_STRT TSI_STRT CL9303 CL1504 TSI_DAT_0 DMD_TU_IFAGC_WT CL9304 CL1505 — TSI_DAT_1 DMD_TU_IFAGC_R...

  • Page 17: Batl Board Schematic Diagram (3 Of 12)

    BATL-P3.pdf 2/15/2011 11:11:06 AM KDL-40NX725/55NX725/60NX725 BATL BOARD SCHEMATIC DIAGRAM (3 OF 12) M_R_CLK ONENAND_+1.8V — R8427 1005 X_M_RCSB X_M_RCSB X_M_RAVDB M_RINT M_RINT ONENAND_+1.8V — ADQ9 ADQ10 ADQ15 ADQ0 — IC8402 TC58RYG1S8EBAIA VCC_IO ADQ12 ADQ5 ADQ4 ADQ11 ADQ8 VCC_CORE ADQ6 —...

  • Page 18: Batl Board Schematic Diagram (4 Of 12)

    KDL-40NX725/55NX725/60NX725 BATL-P4.pdf 2/15/2011 12:15:50 PM BATL BOARD SCHEMATIC DIAGRAM (4 OF 12) — P o r t i o n 1 DDR3_A0_HSS DDR3_A_DQ1_HSS DDR3_A7_HSS DQL0 DDR3_A1_HSS DDR3_A_DQ0_HSS DDR3_A12_HSS DQL1 DDR3_A2_HSS DDR3_A_DQ6_HSS DDR3_A5_HSS DQL2 DDR3_+1.5V DDR3_A3_HSS DDR3_A_DQ7_HSS DDR3_A3_HSS DQL3 DDR3_A_DQ0_HSS DDR3_A4_HSS...

  • Page 19: Batl Board Schematic Diagram (5 Of 12)

    KDL-40NX725/55NX725/60NX725 BATL BOARD SCHEMATIC DIAGRAM (5 OF 12) — — M_SCART1_CV — +5.0V_MAIN AUDIO IN/OUT VIDEO IN/OUT VFE_XO M_COMP2 AVII_CV0 AUDIO IN/OUT AVII_CV1 VFE_XI 6 . 3 V C4000 CL4012 *C4043 — AAUO_L5 AAUO_LOP AVII_CV2 C4001 6 . 3 V...

  • Page 20: Batl Board Schematic Diagram (6 Of 12)

    KDL-40NX725/55NX725/60NX725 BATL-P6.pdf 2/15/2011 12:18:46 PM BATL BOARD SCHEMATIC DIAGRAM (6 OF 12) M_ETRXER_HSS — M_ETCRS_HSS +3.3V_MAIN M_ETMDIO R5051 M_ETMDC_CLK — GND_D GND_D X_SYSTEM1_RST — C5019 0 . 1 CL5003 CL5005 CL5007 CL5009 1005 CL5004 CL5006 CL5008 GND_D RB5204 CL5010 DVDD33...

  • Page 21: Batl Board Schematic Diagram (7 Of 12)

    KDL-40NX725/55NX725/60NX725 BATL BOARD SCHEMATIC DIAGRAM (7 OF 12) — PANEL_VCC_SW JL6004 C6004 0 . 0 0 1 To G board REG+12V T-CON_VCC(12.5V/5V) C6007 JL6003 +3.3V_MAIN REG+12.5V — 2012 REG+12.5V D+1.2V REG+12.5V_GND REG+12.5V_GND JL6005 GND_AU AUDIO+12.5V_GND R6005 AUDIO+12.5V_GND +12.5V C6077 C6012 2 .

  • Page 22: Batl Board Schematic Diagram (8 Of 12)

    KDL-40NX725/55NX725/60NX725 BATL BOARD SCHEMATIC DIAGRAM (8 OF 12) — HDMI/LVDS HDMI_CLK_P HDMI_CKP LVDS_VMID　 CL2008 HDMI_CLK_P HDMI_CLK_N HDMI_CKM HDMI_CLK_N LVDS_VS　 HDMI_D0_P D1 HDMI_RAP AB25 CL2009 HDMI_D0_P HDMI_D0_N D2 HDMI_RAM LVDS_HS　 CL2010 AC25 HDMI_D0_N HDMI_D1_P HDMI_RBP M_LVDS-EVEN HDMI_D1_P *CN2001 LVDSB_TP_4　 M_LVDSEVEN4_P HDMI_D1_N...

  • Page 23: Batl Board Schematic Diagram (9 Of 12)

    KDL-40NX725/55NX725/60NX725 BATL BOARD SCHEMATIC DIAGRAM (9 OF 12) — — CL2700 SCART1_R CL2701 SCART1_L *R2718 HP_DET/BIND CL2718 LINEOUT_R LINEOUT_L HP/LINE Out CL2717 J2702 VIDEOB_DET M_COMP2 — CL2702 AAUI_R1 C7019 1000p M_COMP2_SOY 1005 1608 CL2703 M_COMP2_Y AAUI_L1 0 . 4 7...

  • Page 24: Batl Board Schematic Diagram (10 Of 12)

    KDL-40NX725/55NX725/60NX725 BATL BOARD SCHEMATIC DIAGRAM (10 OF 12) CL5505 HDMIA_HPD HDMI_DDC_5V_A R5514 R5524 — CHIP 1005 GND_D HDMI_TXD2_P HDMI_D2_P DDC +5V HDMI_TXD2_N CL5507 HDMI_D2_N HDMIA_DDCDAT HDMI_TXD1_P — CL5508 HDMI_D1_P DDC DAT HDMIA_DDCCLK HDMI_TXD1_N HDMI_D1_N DDC CLK ARC_OUT_HSS *L5510 +5.0V_MAIN 90ohm...

  • Page 25: Batl Board Schematic Diagram (11 Of 12)

    KDL-40NX725/55NX725/60NX725 BATL BOARD SCHEMATIC DIAGRAM (11 OF 12) — +12.5V F4601 — C4606 2012 C4501 — 6 . 3 V 1005 *L4601 15uH C4611 0 . 4 7 *CN4602 R4612 2012 4 . 7 k C4612 C4601 0 . 4 7...

  • Page 26: Batl Board Schematic Diagram (12 Of 12)

    KDL-40NX725/55NX725/60NX725 BATL BOARD SCHEMATIC DIAGRAM (12 OF 12) — A2.5V — FB1401 600ohm BK1005x A2.5V C1406 6 . 3 V C1403 0 . 1 VDD22DMD C1404 0 . 0 0 1 FB1400 — 600ohm BK1005x R1401 C1407 C1400 0 . 0 1 0 .
  • Page 27 KDL-40NX725/55NX725/60NX725 BATL [SYSTEM/STREAM/DEMOD/CI/BCAS/ONE NAND/DDR3/VIDEO AUDIO IN/OUT/ETHERNET/USB/ POWER/GND/HDMI/LVDS/PANEL/A/V CONNECTOR/HDMI EQ/CONNECTOR/AUDIO AMP/TUNER] COMPONENT SIDE C N 6 0 0 1 F4701 F4601 C N 6 0 0 2 C N 2 0 0 1 — C N 9 0 0 6 —...
  • Page 28 KDL-40NX725/55NX725/60NX725 BATL [SYSTEM/STREAM/DEMOD/CI/BCAS/ONE NAND/DDR3/VIDEO AUDIO IN/OUT/ETHERNET/USB/ POWER/GND/HDMI/LVDS/PANEL/A/V CONNECTOR/HDMI EQ/CONNECTOR/AUDIO AMP/TUNER] CONDUCTOR SIDE — I C 4 6 0 1 I C 4 7 0 1 — — I C 1 8 0 1 — I C 1 8 0 2 —...

  • Page 29: G4 Board Schematic Diagram (Kdl-40Nx725 Only) (Page 1 Of 2

    KDL-40NX725/55NX725/60NX725 G4 BOARD SCHEMATIC DIAGRAM (KDL-40NX725 ONLY) (PAGE 1 OF 2) JL6523 G4A : APS-292(CH) Mount Mecha A6151 X25492331 G4A/C:D6151,D6152,D6153,D6154, G4B/BW:D6151,D6153 G4B : APS-293(CH) G4BW : APS-293/W(CH) Mount Mecha A6101 420783901 Q6101,Q6104,4-276-999-01 C6108 G4C : APS-294(CH) 0 . 1 —...

  • Page 30: G4 Board Schematic Diagram (Kdl-40Nx725 Only)

    KDL-40NX725/55NX725/60NX725 G4 BOARD SCHEMATIC DIAGRAM (KDL-40NX725 ONLY) (PAGE 2 OF 2) JL6716 Mount Mecha A6701 426610901 Q6701,Q6702 R6717 C6711 1/10W 0 . 1 RN-CP — 001:8B JL6709 PFC_OUT G4A Diode FMEN-220A(100V,20A,SBD) G4B/BW/C Diode SANKEN FMN-2206S(600V,20A,FRD) — *D6803 001:7D FMEN-220A JL6708...
  • Page 31 KDL-40NX725/55NX725/60NX725 [POWER] [POWER] COMPONENT SIDE (KDL-40NX725 ONLY) CONDUCTOR SIDE (KDL-40NX725 ONLY) C 6 1 5 4 C 6 1 5 5 D 6 1 5 1 D 6 1 5 4 L 6 1 5 1 D 6 1 5 2...

  • Page 32: G6 Board Schematic Diagram (Kdl-55Nx725/60Nx725 Only)

    KDL-40NX725/55NX725/60NX725 G6 BOARD SCHEMATIC DIAGRAM (KDL-55NX725/60NX725 ONLY) JL6057 RJJ0319DSP Q6153 Mount Mecha A6001 X25803411 D6001,TH6501,Q6501,Q6502,D6003,D6505 Heat-sink_G6_A JL6219 JL6220 JL6135 EY6022 PFC_GND CN6501 R6190 R6003 C6002 Mount Mecha A6002 X25492331 D6003 EY6023 JL6174 PFC_OUT 1/10W C6165 — 1/10W JL6175 JL6176 RN-CP...
  • Page 33 KDL-40NX725/55NX725/60NX725 [POWER] [POWER] COMPONENT SIDE (KDL-55NX725/60NX725 ONLY) CONDUCTOR SIDE (KDL-55NX725/60NX725 ONLY) P R I M A R Y P R I M A R Y S E C O N D A R Y S E C O N D A R Y...

  • Page 34: G7 Board Schematic Diagram (Kdl-55Nx725/60Nx725 Only)

    KDL-40NX725/55NX725/60NX725 G7 BOARD SCHEMATIC DIAGRAM (KDL-55NX725/60NX725 ONLY) JL6619 Mount Mecha A6600 X25492331 Q6602,Q6603 CN6600 EY6608 JL6601 R6616 C6610 PFC_GND 1/10W 0 . 1 RN-CP PFC_OUT — EY6609 JL6620 EY6610 JL6600 JL6604 EY6713 D6702 FMEN-220B EY6700 JL6704 450V C6602 JL6719 EY6725...
  • Page 35 KDL-40NX725/55NX725/60NX725 [POWER] [POWER] COMPONENT SIDE (KDL-55NX725/60NX725 ONLY) CONDUCTOR SIDE (KDL-55NX725/60NX725 ONLY) — — — — — — — — — — — — — — — — — — — — — — — — — — — — —...

  • Page 36: Hem2 Board Schematic Diagram

    KDL-40NX725/55NX725/60NX725 HEM2 BOARD SCHEMATIC DIAGRAM LED+12V C302 C303 C304 C305 C306 C307 C308 C309 C310 C311 0 . 1 0 . 1 R301 CL300 3216 3216 3216 3216 3216 1005 3216 1005 L300 C301 47uH — 0 . 1 1005...
  • Page 37 KDL-40NX725/55NX725/60NX725 HEM2 [EMITTER] COMPONENT SIDE R334 Q 3 0 5 R340 R338 R337 R336 R335 Q305 R332 C319 R322 R333 Q302 R339 D309 FB300 VDR300 C312 R302 C306 Q304 temp002 C310 C307 R343 R313 FB302 VDR301 C313 R303 RB301 C309...

  • Page 38: Hlt2 Board Schematic Diagram

    KDL-40NX725/55NX725/60NX725 HLT2 BOARD SCHEMATIC DIAGRAM JL106 STBY+3.3V — LED_REC LED_STBY LED_TIMER LED_POWER LED_PIC_MUTE OPT_SENS VD+3.3V — SIRCS DEVICE_SDA DEVICE_SCL CN100 JL100 R102 R103 JL102 JL104 R114 R115 JL105 JL101 R119 C102 — 2012 IOUTGND VCC *R129 *D100 *D105 *D104 LNJ337W830S0...
  • Page 39 KDL-40NX725/55NX725/60NX725 HLT2 [IR/LED/OPTICAL SENSOR] COMPONENT SIDE R119 R119 JL106 C103 C102 JL106 C103 C102 RB100 RB100 R118 1 - 8 8 3 - 7 5 7 - 2 1 R118 1 - 8 8 3 - 7 5 7 - 2 1...

  • Page 40: Ld Board Schematic Diagram (Kdl-40Nx725 Only)

    KDL-40NX725/55NX725/60NX725 LD BOARD SCHEMATIC DIAGRAM (KDL-40NX725 ONLY) 3.3V R1072 R1064 1/16W DA2J10400L RN-CP A [ 3 2 4 0 I N C H ] B [ 4 6 5 5 6 0 ] 1/16W D1009 — RN-CP C 1 0 0 4...
  • Page 41 KDL-40NX725/55NX725/60NX725 [LED DRIVER] COMPONENT SIDE (KDL-40NX725 ONLY) 1 - 8 8 3 - 3 0 0 - 4 1 C N 1 0 0 1 C N 1 0 0 0 ( 1 - 7 3 2 - 4 3 8 - 4 1 )

  • Page 42: Section 2: Electrical Parts List

    1µF 10% 6.3V C1411 1-100-909-11 CERAMIC CHIP 10µF 10% 6.3V A-1819-123-A BATL BOARD, COMPLETE C1412 1-114-130-11 CERAMIC CHIP 1µF 10% 6.3V (KDL-40NX725/55NX725 ONLY) C1413 1-114-130-11 CERAMIC CHIP 1µF 10% 6.3V A-1823-588-A BATL BOARD, COMPLETE (KDL-60NX725 ONLY) C1414 1-114-130-11 CERAMIC CHIP 1µF 10% 6.3V AFTER REPLACING THE MAIN BOARD OR THE LCD PANEL,...
  • Page 43 KDL-40NX725/55NX725/60NX725 BATL REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C2014 1-100-916-11 CERAMIC CHIP 0.1µF 10% 16V C1614 1-164-868-11 CERAMIC CHIP 56pF C2019 1-114-869-11 CERAMIC CHIP 2.2µF 10% 6.3V C1615 1-164-852-11 CERAMIC CHIP 12pF C2020 1-112-777-11 CERAMIC CHIP 0.01µF 10% 25V...
  • Page 44 KDL-40NX725/55NX725/60NX725 BATL REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C6010 1-114-331-11 CERAMIC CHIP 4.7µF 10% 10V C4504 1-114-130-11 CERAMIC CHIP 1µF 10% 6.3V C6011 1-114-802-11 CERAMIC CHIP 0.0033µF 10% 50V C4522 1-114-130-11 CERAMIC CHIP 1µF 10% 6.3V C6012 1-114-325-11 CERAMIC CHIP 0.1µF...
  • Page 45 KDL-40NX725/55NX725/60NX725 BATL REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C9031 1-100-916-11 CERAMIC CHIP 0.1µF 10% 16V C7018 1-116-151-11 CERAMIC CHIP 0.001µF 2% C9032 1-100-916-11 CERAMIC CHIP 0.1µF 10% 16V C7020 1-116-151-11 CERAMIC CHIP 0.001µF 2% C9033 1-164-848-11 CERAMIC CHIP 8pF 0.50pF 50V...
  • Page 46 KDL-40NX725/55NX725/60NX725 BATL REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES DIODE C9644 1-100-916-11 CERAMIC CHIP 0.1µF 10% 16V C9645 1-100-916-11 CERAMIC CHIP 0.1µF 10% 16V D1107 6-502-470-01 DIODE 1SS387 C9646 1-100-916-11 CERAMIC CHIP 0.1µF 10% 16V D1201 6-502-470-01 DIODE...
  • Page 47 KDL-40NX725/55NX725/60NX725 BATL REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES FB4095 1-469-084-21 FERRITE IC8402 6-716-980-01 TC58RYG1S8EBAIA FB4096 1-469-084-21 FERRITE IC9006 6-713-333-01 PST8429UL FB4097 1-469-084-21 FERRITE IC9007 6-714-506-01 MM3404A12URE FB4098 1-469-084-21 FERRITE IC9008 6-716-843-01 MM3285FNRE FB4099 1-469-084-21...
  • Page 48 KDL-40NX725/55NX725/60NX725 BATL REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R1405 1-218-941-81 METAL CHIP 100 1/16W L6001 1-457-864-11 INDUCTOR 1µH R1407 1-218-941-81 METAL CHIP 100 1/16W L6002 1-457-730-11 INDUCTOR 2.2µH L6003 1-460-357-11 INDUCTOR 3.3µH R1408 1-218-941-81 METAL CHIP 100...
  • Page 49 KDL-40NX725/55NX725/60NX725 BATL REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R2430 1-218-990-81 SHORT CHIP R5633 1-216-864-11 SHORT CHIP R2431 1-218-945-11 METAL CHIP 220 1/16W R5634 1-218-941-81 METAL CHIP 100 1/16W R2432 1-218-945-11 METAL CHIP 220 1/16W R5635 1-218-941-81 METAL CHIP 100 1/16W...
  • Page 50 KDL-40NX725/55NX725/60NX725 BATL REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R9480 1-218-941-81 METAL CHIP 100 1/16W R9053 1-250-503-11 METAL CHIP 2.2K 1/16W R9490 1-218-990-81 SHORT CHIP R9055 1-218-965-11 METAL CHIP 10K 1/16W R9495 1-218-990-81 SHORT CHIP R9057 1-218-953-11 METAL CHIP 1/16W R9600...
  • Page 51 KDL-40NX725/55NX725/60NX725 BATL G4 G6 HEM2 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES RB5511 1-234-375-21 RES, NETWORK 1K (1005X4) X9000 1-814-485-11 QUARTZ CRYSTAL UNIT RB8400 1-234-702-11 RES, NETWORK 68 (1005X4) X9001 1-781-525-11 VIBRATOR, CRYSTAL RB8401 1-234-702-11 RES, NETWORK 68 (1005X4) X9001 1-814-476-11 QUARTZ CRYSTAL UNIT RB8402 1-234-702-11 RES, NETWORK 68 (1005X4) RB8403 1-234-372-11...
  • Page 52 METAL CHIP 1/16W R336 1-250-451-11 METAL CHIP 1/16W R337 1-250-451-11 METAL CHIP 1/16W A-1817-201-A LD BOARD, MOUNTED R339 1-218-969-11 METAL CHIP 22K 1/16W (KDL-40NX725 ONLY) CAPACITOR R340 1-250-519-11 METAL CHIP 10K 1/16W R343 1-216-864-11 SHORT CHIP C1004 1-100-925-21 CERAMIC CHIP 0.0022µF 10% 250V C1008 1-116-735-11 CERAMIC CHIP 1µF...
  • Page 53 KDL-40NX725/55NX725/60NX725 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C1036 1-116-735-11 CERAMIC CHIP 1µF 10% 16V TRANSISTOR C1037 1-116-735-11 CERAMIC CHIP 1µF 10% 16V Q1000 6-552-743-01 TRANSISTOR R5005CNJFU7TL C1038 1-116-727-11 CERAMIC CHIP 2.2µF 10% 16V Q1002 6-552-743-01 TRANSISTOR R5005CNJFU7TL...
  • Page 54 KDL-40NX725/55NX725/60NX725 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R1051 1-218-949-11 METAL CHIP 470 1/16W R1052 1-218-949-11 METAL CHIP 470 1/16W R1054 1-218-949-11 METAL CHIP 470 1/16W R1055 1-218-949-11 METAL CHIP 470 1/16W R1063 1-218-961-11 METAL CHIP 4.7K 1/16W R1064 1-250-487-11...

  • Page 55: Appendix A: Encryption Key Components

    MUST BE RETURNED to Sony. b) and if the core charge is NOT covered under the product warranty, the defective un-repaired or modified board MUST BE DESTROYED.

This manual is also suitable for:

Kdl-55nx725Kdl-60nx725

Table of Contents