Switch Unit, Hem2 Board, Camera Module, And Wireless Lan Card Removal - Sony KDL-40NX725 Service Manual

SWITCH UNIT, HEM2 BOARD, CAMERA MODULE, AND
WIRELESS LAN CARD REMOVAL
A Remove 1 screw from Switch Unit
B Lift up Switch Unit and disconnect 2 connectors to detach from Center Cabinet
C Release 2 clips to detach Power Switch from Switch Unit
D Lift up AC Power Cord and disconnect 1 connector to detach from LCD Panel
E Slide-out right side Speaker to detach from Center Cabinet
F Slide-out left side Speaker to detach from Center Cabinet
G Release clips and disconnect 1 connector to detach HEM2 Board from Center Cabinet
H Remove 1 screw from Camera Module, then release clips and disconnect 1 connector to detach from Center
Cabinet
I Carefully lift-up Camera Sealing Cap to detach from Center Cabinet
J Remove 1 screw from Wireless LAN Card to detach from LCD Panel
K Remove 1 screw from Antenna to detach from Center Cabinet
L Remove 1 screw from Antenna to detach from Center Cabinet
C
A
E
B
KDL-40NX725/55NX725/60NX725
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
J
K
L
F
I H
G
D
NOTE: The components identified by shading
and mark are critical for safety. Replace only
!
with part number specified.
101
103
102
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
! 101 1-798-348-11 POWER SWITCH
102 1-489-555-51 SWITCH UNIT
103 1-858-586-11 SPEAKER BOX ASSEMBLY (2X9CM)
! 104 1-838-269-11 POWER-SUPPLY CORD (WITH CONN.)
105 A-1817-206-A HEM2 BOARD, MOUNTED
NOTE: The components identified by a red outline and a
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
108
109
110
103
106
105
107
104
REF. NO. PART NO. DESCRIPTION
106 4-256-663-01 CAP, SEALING (CAMERA)
107 1-489-507-11 CAMERA MODULE
108 1-458-355-11 WIRELESS LAN CARD
109 1-754-746-11 ANTENNA
110 1-754-750-11 ANTENNA
2-990-421-41 SCREW, (+PSW) (M3X6)
4-258-272-01 SCREW, +PWH M3X8
mark contain
[ASSEMBLY INCLUDES]
44