Special Handling Instructions When Replacing The Lcd Panel Assembly - Sony KDL-40NX725 Service Manual

SPECIAL HANDLING INSTRUCTIONS WHEN REPLACING THE LCD PANEL ASSEMBLY

Use the following precautionary guidelines when handling the LCD Panel Assembly to avoid material degradation or screen coating degradation,
and ensure that dust, dirt, or fingerprints are not left between the glass and the LCD Panel Assembly.
1. After removing the boards and connectors, note where the frame is on the panel. (Figure 1)
2. Lift the LCD Panel Assembly by holding the top and bottom of the panel approximately 200mm from the edge with your palms
on the back of the panel. (Figure 2)
CAUTION: Lifting or holding the panel at the corners may damage the panel.
3. Use the same method when taking the replacement panel out of the carton. (Figure 3)
CAUTION: DO NOT lift the LCD Panel by holding the short side of the panel or by placing your palms on the front glass. (Figures 4 & 5)
KDL-40NX725/55NX725/60NX725
SECTION 1 - SAFETY AND FEATURES
Figure 1
Figure 4
Figure 2
Figure 5
Figure 3
4