ViewSonic Pro8300 User Manual page 29

Information
*1 Adjustable range and default setting vary depending on signal type.
*2 This function is only available when the projector is installed an optional filter cover.
*3 The selectable Function list includes Color Mode, Gamma, Overscan, Noise Reduction, Keystone
and Filter Mode.
*4 Saturation is supported under Component, Video and S-Video modes.
*5 Sharpness is supported under HDMI, Component, Video and S-Video modes.
*6 Tint is supported under Component, Video and S-Video modes.
Input Password
Password Delete
Black, Red, Green, Blue,
Cyan, Yellow, Magenta, White
OSD Setting
OSD Timeout
OSD Transparency
Off, CC1, CC2, CC3, CC4,
T1, T2, T3, T4
Others
Status Message
Function*3
Display Type
Swap
Green Mode
Input Source
Filter Hours*2
Filter Hours Reset*2
Equivalent Lamp Hours
Equivalent Lamp Hours
Reset
Factory Default
22
22
On, Off
On, Off
Top-Left, Bottom-Left,
Top-Right, Bottom-Right
0, 10, 20, 30, 40, 50, 60, 70, 80, 90
Zoom
DCR
Test Pattern
Off, PIP, POP
Yes, No
On, Off
20 - 60