ViewSonic Pro8300 User Manual page 33

• Auto: Automatically detect the input signal type from Computer in 1 and Computer in 2
terminals.
• RGB: For VGA signal
• YCbCr:For component signal
ECO Mode
Use this function to dim the projector lamp light output which will lower power consumption
and increase lamp life.
• This function will be unavailable when the DCR function is on.
Filter Mode
Use this function to activate filter mode after the projector is installed an optional filter cover.
High Altitude
Use this function to allow the fans operates at full speed continuously to achieve proper
high altitude cooling of the projector.
Quick Power On
• On: The projector will turn on in 3 seconds.
• Off: The projector will turn on following normal power on procedure.
Quick Power Off
• On: The projector will directly shut down without cooling procedure.
• Off: The projector will shut down following normal cooling procedure.
DC 12V Trigger
Enable or disable to trigger external devices such as an electric screen.
Option
Password
Set or delete the password. When the password function is added, image projection will
require to input the preset password when turning on the projector.
Blank Screen
Blank the screen temporarily, and select the screen color when this function is active.
OSD Setting
Allow you to enter the OSD Setting menu.
• Menu Position: Choose the menu location on the display screen.
• OSD Timeout: Duration of OSD menu display countly starts (at idle state by second).
• OSD Transparency: Select to change the transparency level of the OSD background.
26
26