ViewSonic VS13648 User Manual

ViewSonic VS13648 User Manual

Viewsonic projector user manual

Advertisement

ViewSonic
Pro8200
DLP Projector
IMPORTANT: Please read this User Guide to obtain important
information on installing and using your product in a safe
manner, as well as registering your product for future service.
Warranty information contained in this User Guide will describe
your limited coverage from ViewSonic Corporation, which is
also found on our web site at http://www.viewsonic.com in
box in the upper right corner of our website.
"Antes de operar su equipo lea cuidadosamente las
instrucciones en este manual"
®
- User Guide
- Guide de l'utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell'utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
-
-
-
-
Model No. : VS13648

Advertisement

Table of Contents
loading

Summary of Contents for ViewSonic VS13648

  • Page 1 Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www.viewsonic.com in box in the upper right corner of our website. “Antes de operar su equipo lea cuidadosamente las instrucciones en este manual”...
  • Page 2: Compliance Information

    Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 3: Important Safety Instructions

    Important Safety Instructions Read these instructions. Keep these instructions. the manufacturer’s instructions. A grounding type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the replacement of the obsolete outlet. unit.
  • Page 4: Declaration Of Rohs Compliance

    Declaration of RoHS Compliance Technical Adaptation Committee (TAC) as shown below: Substance Cadmium (Cd) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers or more lead). weight. Pro8200 Proposed Maximum Concentration Actual Concentration...
  • Page 5: Copyright Information

    Product Registration To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic.com. The ® Product Name: Model Number:...
  • Page 6 Please ensure that your outlet fits the plug. Do not defeat the safety purpose of this grounding type plug. We highly recommend using a video source device also equipped with a grounding type AC line plug to prevent signal interference due to voltage fluctuations. Ground ViewSonic Pro8200...
  • Page 7: Table Of Contents

    Adjusting Projection Image Size ...25 Locking control keys ...26 Menu Operation ...27 Maintenance ...34 Cleaning the Lens ...34 Cleaning the Projector Housing ...34 Cleaning the Filter Cover ...34 Replacing the Lamp ...35 Specifications ...37 Dimensions ...38 Ceiling mount installation ...38 ViewSonic Pro8200...
  • Page 8 Appendix ...39 LED Indicator Messages ...39 Compatibility Modes ...40 Troubleshooting ...42 RS-232 Command and Configuration ...43 IR Control Code ...45 ViewSonic Pro8200...
  • Page 9: Introduction

    Less than 1 W power consumption in standby mode The information in this manual is subject to change without notices. The reproduction, transfer or copy of all or any part of this document is not permitted without express written consent. ViewSonic Pro8200...
  • Page 10: Package Contents

    When you unpack the projector, make sure you have all these components: Projector with Lens Cap VGA Cable (D-SUB to D- SUB) Optional accessories Filter cover RS232 cable ViewSonic Pro8200 HDMI1 Video AC Power Cord Remote Control (IR) & batteries HDMI Cable ViewSonic DVD...
  • Page 11 Save the original shipping carton and Packing material; they will come-in handy if you ever to ship your unit. for maximum protection, repack your unit as it was originally packed at the factory. ViewSonic Pro8200...
  • Page 12: Projector Overview

    Projector Overview Front View Lens cap Elevator button Elevator foot Lens cap strap Projection lens Front IR remote control sensor Ventilation holes (intake) ViewSonic Pro8200 Filter cover Speaker Focus ring Zoom ring Control panel Lamp cover...
  • Page 13: Rear View

    Ceiling mount holes (M4*8) Tilt-adjustment feet Security bar This projector can be used with a ceiling mount for support. The ceiling mount is not included in the package. Contact your dealer for information to mount the projector on a ceiling. ViewSonic Pro8200...
  • Page 14: Using The Product

    ENTER Enter to sub-menu and confirm the menu selection. SOURCE Display the source selection bar. MENU/EXIT Display or exit the on-screen display menus. Power Turn the projector on or off. Right/Panel key Activate panel key lock. ViewSonic Pro8200 /Up, /Down)
  • Page 15: Connection Ports

    Audio Out Connect to a speaker or other audio input equipment. Audio 2 Connect an audio output from video equipment or computer to this jack. Audio 1 Connect an audio output from video equipment or computer to this jack. ViewSonic Pro8200...
  • Page 16 Connect composite video output from video equipment to this jack. Computer in 2 Connect image input signal (analog RGB or component) to this jack. Computer in 1 Connect image input signal (analog RGB or component) to this jack. ViewSonic Pro8200...
  • Page 17: Remote Control

    Cut off the screen temporarily. Press again to cancel the Blank Screen function. Light Enable backlight functions of the remote control’s buttons. Compo Display Component video (YPbPr/ YCbCr) signal. ViewSonic Pro8200 HDMI1 HDMI2 Compo Video Swap Default HDMI 2 Display HDMI 2 signal.
  • Page 18 PIP/POP Switch screen to PIP/POP by sequence. Swap Swap input source in PIP or POP image. ViewSonic Pro8200 Aspect Select the display aspect ratio. RGBCMY Change indivial RGBCMY color (user color setting). Default Restore settings to factory default.
  • Page 19: Installing The Batteries

    Batteries should not be in or near to fire or water, keep batteries in a dark, cool and dry place. If suspect battery leakage, wipe out the leakage and then replace new batteries. If the leakage adheres to your body or clothes, rinse well with water immediately. ViewSonic Pro8200...
  • Page 20: Remote Control Operation

    Do not drop the remote control or jolt it. Keep the remote control out of locations with excessively high temperature or humidity. Do not get water on the remote control or place wet objects on it. Do not disassemble the remote control. ViewSonic Pro8200...
  • Page 21: Connection

    The connection illustrations above are for reference only. The rear connecting jacks available on the projector vary with each projector model. For detailed connection methods, see pages 18-21. ViewSonic Pro8200 S-Video cable Composite Video cable Audio cable HDMI cable Microphone 3.5 mini jack cable...
  • Page 22: Connecting A Computer Or Monitor

    Connect the other end of the cable to the Monitor Out socket on the projector. Important The Monitor Out output only works when Computer in 1 or Computer in 2 is made to the projector. ViewSonic Pro8200 ® computers. A Mac adapter is needed if you are “Connecting a computer” on...
  • Page 23: Connecting Video Source Devices

    “Connecting a composite Video source device” on page 21 projector to a composite Video device. ViewSonic Pro8200 for how to connect for how to connect the for how to connect the...
  • Page 24: Connecting A Component Video Source Device

    Also check that the signal cables have been connected correctly. RGB to component adapter (ViewSonic P/N: J2552-0212-00) Connecting an S-Video source device Examine your Video source device to determine if it has an unused S-Video output socket available: If so, you can continue with this procedure.
  • Page 25: Connecting A Composite Video Source Device

    You need only connect to this device using a composite Video connection if Component Video and S-Video inputs are unavailable for use. See “Connecting Video source devices” on page 19 ViewSonic Pro8200 “Connecting Video source devices” on page 19 for details.
  • Page 26 To ensure a quality use of the wireless microphone, it is recommended that your microphone conforms to the specifications listed in the table below. Signal Parameter Microphone Transducer Principle Impedance Frequency response ViewSonic Pro8200 Type Dynamic...
  • Page 27: Operation

    Press again to confirm. When the Power LED begins flashing, the projector has entered stand-by mode. Disconnect the AC power cord from the electrical outlet and the projector. Do not turn on the projector right after power off ViewSonic Pro8200...
  • Page 28: Adjusting The Projector Height

    Adjusting the Projector Zoom and Focus Focus the image by rotating the focus ring. A still image is recommended for focusing. Adjust the image size by sliding the zoom ring. ViewSonic Pro8200 Tilt-adjustment feet Zoom ring Focus ring Elevator foot...
  • Page 29: Adjusting Projection Image Size

    This will help you determine the exact mounting position so that it best suits your installation location. ViewSonic Pro8200 Screen Vertical offset Projection distance 16 : 9 Screen (max.
  • Page 30: Locking Control Keys

    Keys on the remote control are still functional when panel key lock is enabled. If you press Power to turn off the projector without disabling panel key lock, the projector will still be in locked status the next time it is turned on. ViewSonic Pro8200 Power. HDMI1 HDMI2 Compo...
  • Page 31: Menu Operation

    Menu Operation The projector has multilingual on-screen display menus that allow you to make image ViewSonic Pro8200...
  • Page 32 Video/Audio Noise Reduction Microphone Volume Speaker Volume Setting Quick Power Off DC 12V Trigger ViewSonic Pro8200 Brightest, Standard, Theater, Color Mode Dark Room, User1, User2 Saturation*4 Video Setting Sharpness*5 Tint*6 Color Temp. Red Gain...
  • Page 33 ViewSonic Pro8200...
  • Page 34 *4 Saturation is supported under Component, Video and S-Video modes. *5 Sharpness is supported under HDMI, Component, Video and S-Video modes. *6 Tint is supported under Component, Video and S-Video modes. ViewSonic Pro8200 Input Password Password Delete Black, Red, Green, Blue,...
  • Page 35: How To Operate

    Gamma Effect the represent of dark scenery. With greater gamma value, dark scenery will look brighter. ViewSonic Pro8200 to select any feature in the main menu. to enter sub-menu for feature...
  • Page 36 When HDMI 2 is turned on, Audio in 1, Audio in 2 and Audio in 3 will turn off automatically. Microphone Volume Adjust the microphone’s volume level. Speaker Volume Adjust the projector’s volume level. Mute Cut off the sound temporarily. Setting Auto Keystone Automatically correct distorted images resulting from an angled projection. ViewSonic Pro8200...
  • Page 37 Use this function to activate filter mode after the projector is installed an optional filter cover. High Altitude Use this function to allow the fans operates at full speed continuously to achieve proper high altitude cooling of the projector. Quick Power On ViewSonic Pro8200...
  • Page 38 DCR will impact lamp life and system noise performance. Test Pattern: Display embedded test pattern. Function Allow user to define a short cut key on the remote control, and the function item is selected in OSD menu. Display Type ViewSonic Pro8200...
  • Page 39 Reset the lamp Hour to 0 hours. Factory Default Restore settings to factory default. The following settings will still remain: Language, Projection, High Altitude, Filter Mode, Password, Lamp Hours, Filter Hours, Auto Keystone, Keystone. Language Select the language used by the on-screen menu. ViewSonic Pro8200...
  • Page 40: Maintenance

    Make sure the lens is cool before cleaning. Do not use detergents or chemicals other than those noted above. Do not use benzene or thinners. Do not use chemical sprays. Use a soft cloth or lens paper only. ViewSonic Pro8200...
  • Page 41: Replacing The Lamp

    Leave the area immediately if the lamp shatters while being operated and ventilate the area for at least 30 minutes in order to avoid the inhalation of mercury fumes. Otherwise it could be harmful to user’s health. ViewSonic Pro8200...
  • Page 42 Do not reuse the old lamp. This could cause the lamp to explode. Be sure to turn off the projector and unplug the AC power cord before replacing the lamp. Do not use the projector with the lamp cover removed. ViewSonic Pro8200...
  • Page 43: Specifications

    AC 100-240 V, 50 - 60 Hz, 2.6A Power consumption 390 W Dimension (W x D x H) 335 x 267 x 132 mm Weight 3.86 kg (8.5 lbs) Note: Design and Specifications are subject to change without prior notice. ViewSonic Pro8200...
  • Page 44: Dimensions

    Dimensions 335 mm (W) x 267 mm (D) x 132 mm (H) Ceiling mount installation ViewSonic Pro8200 64.5 Ceiling mount screws: M4 x 8 (Max. L = 8 mm) Unit: mm 84.9...
  • Page 45: Appendix

    Lamp LED Temp LED Power LED Blue Lamp LED Temp LED Power LED Blue Lamp LED Temp LED ViewSonic Pro8200 Status Meaning Solid Standby mode when green mode is turned on. Flash Standby mode when green mode is turned off. Solid...
  • Page 46: Compatibility Modes

    Compatibility SVGA SXGA UXGA Mac 13 Mac 16 Mac 19 1080i30 1080i25 480p 576p 720p60 720p50 1080p60 1080p50 ViewSonic Pro8200 Resolution H-Sync [KHz] 640 x 480 24.69 31.5 37.9 37.5 43.3 800 x 600 30.99 35.2 37.9 48.1 46.9 53.7 1024 x 768 39.63...
  • Page 47: Video

    1920 x 1080 720p 1280 x 720 720p 1280 x 720 576p 720 x 576 576i 720 x 576 480p 720 x 480 480i 720 x 480 ViewSonic Pro8200 H-Sync [KHz] V-Sync [Hz] 67.5 56.3 33.8 28.1 37.5 31.3 15.6 31.5 15.8...
  • Page 48: Troubleshooting

    Aim the remote control at the screen or at the front or back of the projector. Move the remote control so it is more directly in front of or behind the projector and not as far to the side. ViewSonic Pro8200...
  • Page 49: Rs-232 Command And Configuration

    POWER ON / POWER OFF POWER ON POWER OFF SOURCE SELECT Computer 1 Computer 2 COMPONENT COMPOSITE S-VIDEO HDMI 1 HDMI 2 USB A ViewSonic Pro8200 Wire List SHELL 19200 bps 8 bit None 1 bit None BE,EF,10,05,00,C6,FF,11,11,01,00,01,00 BE,EF,02,06,00,6D,D2,34,00,00,00,00,00 BE,EF,02,06,00,BC,D3,35,00,00,00,00,00 BE,EF,02,06,00,8F,D3,36,00,00,00,00,00...
  • Page 50 OTHER FUNCTION DCR ON DCR OFF ECO ON ECO OFF VOLUME INC VOLUME DEC KEYSTONE INC KEYSTONE DEC FACTORY RESET LAMP HOURS RESET FILTER HOURS RESET ViewSonic Pro8200 BE,EF,02,06,00,C8,D7,01,00,00,00,00,00 BE,EF,02,06,00,FB,D7,02,00,00,00,00,00 BE,EF,02,06,00,2A,D6,03,00,00,00,00,00 BE,EF,02,06,00,9D,D7,04,00,00,00,00,00 BE,EF,02,06,00,4C,D6,05,00,00,00,00,00 BE,EF,02,06,00,E6,D6,0F,00,00,00,00,00 BE,EF,02,06,00,F2,D5,1B,00,00,00,00,00 BE,EF,02,06,00,C7,D2,3E,00,00,00,00,00 BE,EF,02,06,00,16,D3,3F,00,00,00,00,00 BE,EF,02,06,00,D9,D8,40,00,00,00,00,00 BE,EF,02,06,00,08,D9,41,00,00,00,00,00 BE,EF,02,06,00,7F,D6,06,00,00,00,00,00...
  • Page 51: Ir Control Code

    IR Control Code System Code: 83F4 Format : NEC HDMI1 HDMI2 Compo Video Swap Default ViewSonic Pro8200...
  • Page 52: Customer Support

    Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS Electroser, Av Reforma No. 403Gx39 y 41, 97000 Mérida, Yucatán. Tel: 01.999.925.19.16 Other places please refer to http://www.viewsonic.com/la/soporte/index.htm#Mexico Latin America (Peru) www.viewsonic.com/la/ Macau www.hk.viewsonic.com...
  • Page 53: Limited Warranty

    VIEWSONIC use, during the warranty period. If a product proves to be defective in material or workmanship a like product. Replacement product or parts may include remanufactured or refurbished parts or components. Limited Three (3) year General Warranty purchase. Limited One (1) year Heavy Usage Warranty: warranty information.
  • Page 54 Any other cause which does not relate to a product defect. number. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product. Exclusion of damages: not be liable for: opportunity, loss of goodwill, interference with business relationships, or other commercial loss,...
  • Page 55: Mexico Limited Warranty

    (d) a description of the problem, and (e) the serial number of the product. Exclusion of damages: business relationships, or other commercial loss, even if advised of the possibility of such damages. Any other damages, whether incidental, consequential or otherwise. Pro8200 ® VIEWSONIC PROJECTOR...
  • Page 56 Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004 Hermosillo: Puebla, Pue. (Matriz): Chihuahua Chihuahua, Chih. Distrito Federal: Guerrero Acapulco MERIDA: Tijuana: Pro8200 Villahermosa:...

This manual is also suitable for:

Pro8200

Table of Contents