Remote Control - ViewSonic Pro8300 User Manual

Remote Control

1. Power
Turn the projector on or off.
2. HDMI 1
Display HDMI 1 signal.
3. Source
Display the source selection bar.
4. Up/Volume +,
When the On-Screen
(OSD) menu is not activated, adjust
the projector's sound level.
5. Left/Mute
When the On-Screen
(OSD) menu is not activated, this
button is used as mute function.
6. Menu
Display on-screen display menus.
7. PIP/POP
Switch screen to PIP/POP by
sequence.
8. Auto Sync
Resynchronize the projector to the
input signal from a computer. This
function is available for computer
mode only.
9. Function
User definable key for customized
function.
10. Pattern
Display embedded test pattern.
11. Color Mode
Change the image mode setting by
sequence.
12. Blank
Cut off the screen temporarily.
Press again to cancel the Blank
Screen function.
Down/Volume -
Display
Display
13. Laser
14. Video
15. HDMI 2
16. PC
17. Enter
18.
8
8
3
4
5
4
6
7
8
9
10
11
12
Aim the remote at the viewing screen,
press and hold this button to activate the
laser pointer.
Switch input source to Composite/S-
Video by sequence.
Display HDMI 2 signal.
Switch input source to Computer in 1/
Computer in 2 by sequence.
Confirmed selections.
Right/ Lock
When the On-Screen Display (OSD)
menu is activated, the #4, #5, and #18
keys are used as directional arrows to
select the desired menu items and to
make adjustments.
Activate panel key lock.
13
14
15
16
17
18
19
20
21
22
23
24