Change Grease Filters - Miele PUR 68 W Operating And Installation Instructions

Cleaning and care
Unsuitable cleaning agents
Unsuitable cleaning agents can cause
damage to the surface of the filters if
used regularly.
Do not use:
- cleaning agents containing descaling
agents,
- powder cleaners or cream cleaners,
- aggressive all-purpose cleaning
agents or spray cleaners for grease,
- oven sprays.
Cleaning the grease filters in the
dishwasher
 Place the grease filters upright or
slightly inclined in the lower basket.
Ensure the spray arm is not
obstructed.
 Use a standard household
dishwasher detergent.
 Select a dishwasher programme with
a wash temperature between 50 °C
and 65 °C.
Depending on the detergent used,
cleaning the filters in the dishwasher
may cause the inside filter surfaces to
become discoloured. This will not
affect the functioning of the grease
filters in any way.
After cleaning
 After cleaning, leave the filters to dry
on an absorbent surface before
refitting them.
22
 When removing the filters for
cleaning, also clean off any residues
of oil or fat from the now accessible
housing to prevent the risk of these
catching fire.
 Refit the grease filters. When
inserting the grease filters, make sure
that the latch faces outwards.
 If a grease filter is inadvertently fitted
upside down, insert a small
screwdriver blade into the slit to
disengage the clip.

Change grease filters

Regular use and cleaning can cause the
filter surfaces to wear.
If you notice any damage, replace the
grease filters.
You can obtain grease filters from Miele
customer service (see end of these
operating instructions) or from your
Miele specialist dealer.