Grease Filters - Miele DA 408 Operating And Installation Instructions

Cleaning and Care
Grease fi_ters
The reusable metal grease filters
remove solid particles from the vented
kitchen air (grease, dust, etc).
Cleaning the grease filters
[] - By hand: use a scrub brush in
warm water with a mild detergent.
- In a dishwasher: place the filters
vertically in the lower basket, making
sure that the spray arm is not
blocked. Wash using the "San! Wash"
or "Normal Plus" programs.
The grease filters should be cleaned
every 3 - 4 weeks or when the grease
filter indicator lights.
L...................... i\%\
[] To remove the grease filters pull the
locking clips, t, forward. Lower the
filter 45 °, 2, unhook it at the rear, 3,
and take it ouL Support the grease
filter so that it does not fall onto the
cooktop.
discoloration of the filter surface.
Performance of the filter will not be
affected by this discoloration.
[] After cleaning, the filters can be
placed on a towel to air dry.
[] While the filters are removed, clean
any dirt or grease from the filter
casing to prevent the risk of fire.
When putting the grease filters back
make sure that the locking clips are
visibly facing the cooking surface.
If the filters are incorrectly installed,
insert a small screwdriver into the slit
along its edge to disengage it from the
casing.
[] After returning the grease filters,
press and hold the grease filter
button for 3 seconds to reset the
timer. The indicator light will go out.
[] If the grease filters are cleaned
before the grease filter timer has
reached its maximum, press the
grease filter button for 6 seconds to
reset the counter to zero.
18