Table of Contents
Advertisement
Cleaning the grease filters in the
dishwasher
Place the grease filters upright or
slightly inclined in the lower basket.
Ensure the spray arm is not
obstructed.
Use a standard household
dishwasher detergent.
Select a dishwasher programme with
a wash temperature between 50 °C
and 65 °C.
Depending on the detergent used,
cleaning the filters in the dishwasher
may cause the inside filter surfaces to
become discoloured. This will not
affect the functioning of the grease
filters in any way.
After cleaning
After cleaning, leave the filters to dry
on an absorbent surface before
refitting them.
When removing the filters for
cleaning, also clean off any residues
of oil or fat from the now accessible
housing to prevent the risk of these
catching fire.
Refit the grease filters.
Resetting the grease filter operating
hours counter
After cleaning, the operating hours
counter needs to be reset.
While the fan is switched on, press
the grease filter control for approx.
3 seconds until only 1 is flashing.
The grease filter symbol goes out.
Cleaning and care
Change grease filters
Regular use and cleaning can cause the
filter surfaces to wear.
If you notice any damage, replace the
grease filters.
You can obtain grease filters from Miele
customer service (see end of these
operating instructions) or from your
Miele specialist dealer.
35
Advertisement
Table of Contents
