Cleaning And Care; Housing; Grease Filters - Miele DA 7090 W Operating And Installation Instructions

Hide thumbs Also See for DA 7090 W:
Table of Contents

Advertisement

A range of Miele branded cleaning and
conditioning products is available to
order from Miele (see back page for
contact details) or from
www.miele-shop.com.
,
Before any cleaning or
maintenance work is carried out,
disconnect the cooker hood from the
mains supply.
,
Halogen lamps get very hot
during use and remain hot for some
time after being switched off. The
hot lamps are also susceptible to
damage from damp cleaning. Wait a
few minutes after switching off
before commencing cleaning.

Housing

The surfaces and controls are
susceptible to scratches and
abrasions. Please observe the
following cleaning instructions.
^ All external surfaces and controls can
be cleaned using a Miele E-Cloth or
with warm water and a little
washing-up liquid applied with a well
wrung-out soft sponge or cloth.
^ Wipe the surfaces dry using a soft
cloth.
^ Glass surfaces can be cleaned with a
proprietary cleaning agent for glass.
Do not use:
– cleaning agents containing soda,
acids, chlorides or solvents,

Cleaning and care

– abrasive cleaning agents, e.g.
powder cleaners or cream cleaners
and abrasive sponges, as well as pot
scourers or sponges which have
been used previously with abrasive
cleaning agents. These will damage
the surface material.
– sharp metal tools,
– oven sprays.

Grease filters

The grease filters should be cleaned
regularly (at least every 3-4 weeks) to
avoid a build-up of grease, but always
clean immediately if the Grease filter
sensor l lights up.
,
An oversaturated filter is a fire
hazard.
^ To take out the filter, release the
locking clip on the filter, lower the
filter 45°, unhook and remove it.
To avoid damaging the filters or the
hob below, make sure you hold the
filters securely at all times when
handling them.
17

Advertisement

Table of Contents
loading

Table of Contents