Respekta Kaya CH 66060 BSGA Installation & User's Instructions page 65

Fitting the activated charcoal filter (optional)
Fit the activated charcoal filters* before fitting the grease
filter.
*See sect. 5.2.6 Fitting the activated charcoal filter
(optional)
Fitting the mesh grease filters
- Lodge the filter in the openings on the rear of the
hood.
- Press the clip on the filter handle.
- Once the filter has been correctly positioned, release
the clip.
- Repeat the above operations to install all the filters.
Fitting the V-flap
If the hood is not equipped with a preinstalled V-flap
(B10), the two flaps must be fitted in the V-flap housing.
The figures showing how to fit the V-flap are purely
guideline because the procedure may vary according to
the model and configuration.
en-26
Fig. 5.4
Fig. 5.5
B10 B10
Fig. 5.6