Engine Oil Filling - TOHATSU MFS 2.5C Owner's Manual

22
PRE-OPERATING PREPARATIONS
1. Before opening fuel tank cap, turn air
vent screw two times counterclock-
wise to release air pressure in the fuel
tank.
1
1. Air vent screw
2. Fuel tank cap
6
2. Open the fuel tank cap slowly.
3. Fill the fuel not to over the shown
level.
1. Full line
4. After filling the tank, close the tank
cap.
2
ENOF00209-B
1
ENOF00210-0
ENOM00037-1

3. Engine oil filling

ENOW00022-2
CAUTION
The engine oil is drained for shipping at the
factory. Be sure to fill the engine oil to the
proper level before starting the engine.
ENOW00982-0
CAUTION
Do not overfill engine oil, or engine oil
could leak and/or engine could be dam-
aged. If engine oil level is over upper limit
marks of oil level gauge, drain oil to level
lower than upper limit.
Be sure that outboard motor is upright
when checking or changing oil.
Wipe off engine oil well immediately if
spilled and dispose of it in accordance
with local fire prevention and environ-
ment protection regulations.
1. Place the engine in a vertical position.
2. Remove the top cowl and the oil filler
cap.
3. Fill the engine through filler port with
recommended oil to the FULL mark.
4. Tighten the oil filler cap.