TOHATSU MFS 2.5C Owner's Manual page 43

Hide thumbs Also See for MFS 2.5C:
Table of Contents

Advertisement

ENOM00229-2
Oil level checking
Check the engine oil level before each
use. If the oil level is low, or too high, the
life of the engine will be shortened sig-
nificantly.
1. Place the engine in a vertical position.
2. Check the oil level by the oil level
gauge.
1
2
3
FULL
LOW
4
1. Oil filler cap
2. Oil level gauge
3. Upper limit
4. Lower limit
ENON00024-0
Note
The oil level should be checked when the
engine is cooled.
ENON00025-0
Note
Consult with an authorized dealer if the
engine oil is milky color, or appears con-
taminated.
ENOM00082-B
Engine oil replenishing
ENOW00079-A
Do not add engine oil of brand and grade
other than existing one. In case engine oil
of other brand or grade is added, drain all
oil and ask dealer for treatment.
In case other than engine oil such as gaso-
line is put in the oil chamber, empty the
chamber and ask dealer for treatment.
When replenishing engine oil, be careful
not to allow entry of foreign matters such
as dust and water into oil chamber.
Wipe off engine oil well immediately if
spilled and dispose of it in accordance
with local fire prevention and environ-
ment protection regulations.
Do not replenish engine oil over upper
limit. If overfilled, remove oil to upper
limit. If engine oil is over the upper limit, it
can leak potentially leading to engine
damage.
If the oil level is low, or at lowest mark,
ENOF00239-B
add recommended oil to the FULL mark.
INSPECTION AND MAINTENANCE
CAUTION
43
10
ENOF00240-A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfs 3.5c

Table of Contents