Nespresso Momento Coffee User Manual page 40

Hide thumbs Also See for Momento Coffee:
Table of Contents

Advertisement

EN . 40
9
Place the waste water container
below the outlets. Leave the fridge
door open (to avoid condensation in
the milk tank bay during the cleaning
process).
Select "proceed" to launch the
cleaning procedure and follow
the instructions on the screen.
12
Clean and thoroughly dry the milk
aspiration pipe and the milk tank bay
with a single-use paper towel or tissue.
Check visually that the filter on the
milk aspiration pipe is not clogged.
If it is, remove the pipe and clean it
with fresh drinking water.
14
Refill the milk tank with refrigerated
milk. Insert the milk tank back into the
machine fridge.
17
Insert the water tank back into the
machine.
20
Empty the capsule container, wash it
with soapy water and dry it.
10
After the cleaning process has fin-
ished, remove the drip tray with the
drip grid from the machine. Empty the
drip tray. Wash with soapy water, rinse
and dry both elements. Insert the drip
tray with the drip grid back into the
machine.
13
cleaning is finished
Once the cleaning procedure has been
completed, exit the menu.
15
Remove the water tank from the
machine.
18
Clean the top of the machine with
a disposable tissue or paper towel.
Be careful, it might be warm.
21
Insert the capsule container back into
the machine.
11
Remove, empty and clean the
waste water container. Remove the
cleaning tank, remove the lid, empty
the tank and clean both the lid and
cleaning tank. Handle the clean-
ing tank with care as the cleaning
solution is warm and composed of
cleaning agent.
The touch control panel will show the
home screen and the milk fridge will
start to cool down. Close the fridge
door to ensure a proper cooling down
process.
If you want milk recipes to be availa-
ble right after the cleaning process,
refill the milk tank with pre-cooled
milk (5 °C) and insert it back into the
machine's fridge. It will take approx-
imately 15 minutes to be ready to
dispense milk recipes.
16
Remove the water tank lid. Empty it,
clean with a single-use paper towel
or tissue and rinse with fresh drinking
water. Fill the water tank with fresh
drinking water and attach the lid
again.
19
Swing the cup support to the side
and remove the capsule container.
22
Remove the outlet cover. Be careful,
hot water might drip.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents