MacDon C Series Operator's Manual page 11

j. On some types of corn heads you can find high-pressure
hydraulic system. In case of a pressurized system, the piping
system must not be disturbed or exposed to any external
effects of the damage.
k. The drive shaft rotation.
l. To prevent injury from sharp cutting blades: Do NOT operate
without shields in place. Disengage power take-off, stop
engine and remove key before opening covers. Stop engine
and remove key before opening shield. Blades may continue
to rotate after power is shut off. Listen and look for evidence
of rotation before opening shield.
m. To prevent injury from entanglement with rotating auger:
Stand clear of auger while machine is running.
n. Before putting the machine into operation, please remove the
screws which fasten the main frame and side frames on both
sides at delivery.
o. Lifting points on the lifting bar.
SAFETY
9
1.332.254
1.332.252-3
1.372.836
1.372.837
1.372.916
514.038.0