Download
Share
Print this page
NCR Ingenico Lane 5000 Kit Instructions
  1. Manuals
  2. Brands
  3. NCR Manuals
  4. Racks & Stands
  5. Ingenico Lane 5000
  6. Kit instructions

NCR Ingenico Lane 5000 Kit Instructions

Pin pad mount kit
Hide thumbs

Advertisement

Quick Links

Download this manual
Kit Instructions
Ingenico Lane 5000 PIN Pad Mount Kit
7709-K504
Issue A

Advertisement

loading
Need help?

Need help?

Do you have a question about the Ingenico Lane 5000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for NCR Ingenico Lane 5000

Summary of Contents for NCR Ingenico Lane 5000

  • Page 1 Kit Instructions Ingenico Lane 5000 PIN Pad Mount Kit 7709-K504 Issue A...
  • Page 2 NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Software screen images are representative, and in some cases, may not match a customer’s installed software exactly.

  • Page 3: Revision Record

    Revision Record Issue Date Remarks Jun 2019 First Issue...

  • Page 5: Kit Contents

    Ingenico Lane 5000 PIN Pad Mount This publication provides procedures for installing the Ingenico Lane 5000 PIN Pad Mount on an NCR SelfServ™ 90 (7709) Kiosk. Note: This kit is not compatible with SS90 units that include a pedestal or bagrack arm.
  • Page 6 Description 497-0525095 7709–K504 Ingenico Lane 5000 PIN Pad Mount 497-0525221 PIN Pad Mount, SpacePole, Ingenico Lane 5000, 7709 497-0465037 Serial Adapter Cable, RJ48 (10-pin) to DB9, 0.65 meter 497-0524345 Cables, Power and Data, Ingenico Lane 5000 * Items marked with an asterisk are not called out on the image.

  • Page 7: Installation Procedure

    Ingenico Lane 5000 PIN Pad Mount Installation Procedure Warning: Disconnect the AC power cord before disassembling the Terminal. 1. Position the PIN Pad Plate on the Adaptor Plate, and then secure with two M4 flat screws.
  • Page 8 Ingenico Lane 5000 PIN Pad Mount 2. Open the front of the kiosk. 3. Install the PIN Pad mount kit.
  • Page 9 Ingenico Lane 5000 PIN Pad Mount 4. Secure with washers (2) and nuts (2). 5. Connect the PIN Pad cable to the PIN Pad. 6. Route the other end of the PIN Pad cable into the Kiosk cabinet through the access hole on the PIN Pad adaptor plate.
  • Page 10 Ingenico Lane 5000 PIN Pad Mount b. Tighten the M3 screw to secure the PIN Pad to its Mounting Bracket. 8. Inside the cabinet, route the PIN Pad Cable upwards toward the motherboard and plug the PIN Pad Cable into the COM 1 port on the motherboard.