Reolink TrackMix LTE Quick Start Manual page 6

Step 3 Launch the Reolink App, click the "
corner to add the camera. Scan the QR code on the device and follow
the onscreen instructions to finish initial setup.
Devices Cloud
You haven't added any device. Please click
the"+"button in the top right corner to add
Set up the Camera on PC (Optional)
Step 1 Download and install the Reolink Client: Go to https://reolink.com
> Support > App & Client.
Step 2 Loosen the screw and remove the cover, then turn on the power
switch to power on the camera.
Step 3 Launch the Reolink Client, click the "
of the camera to add it and follow the onscreen instructions to finish
initial setup.
9 English
" button in the top right
" button, input the UID code
NOTE: You may also run into the following situations:
Voice Prompt Camera Status
Camera cannot
"SIM card cannot be
recognize
recognized"
this SIM card.
"The SIM card is locked
Your SIM card has a
with a PIN Please
PIN.
disable it"
"Not registered on
network. Please
Camera fails to
activate
register to the
your SIM cardand
operator network.
check
the signal strength"
Camera fails to
"Network connection
connect
failed"
to the server.
"Data call failed. Please
The SIM card has run
confirm your cellular
out of data or APN
data plan is available
settings
or import
are not correct.
the APN settings"
Solutions
1. Check if the SIM card is facing
the reverse direction.
2. Check if the SIM card is not
fully inserted and insert it again.
Put the SIM card into your mobile
phone and disable the PIN.
1. Check whether your card is
activated or not. If not,
please call your operator
to activate the SIM card.
2. The signal is weak at the
current position.
Please move the camera
to a location with better signal.
3. Check if you are using the
correct version of the camera.
The camera will be in Standby
mode and reconnect later.
1. Please check whether the
data plan for the SIM card
is still available.
2. Import the correct APN
settings to the camera.
English 10