Stiga A1500 Instruction Manual page 61

Hide thumbs Also See for A1500:
Table of Contents

Advertisement

The working area is not
mowed completely.
The docking station light
does not turn on when
the robot is out of the
docking station.
The docking station
indicator lights up
昀氀ashing slowly.
The docking station
indicator light 昀氀ashes
rapidly.
The docking station
indicator lights up
昀氀ashing twice or three
times rapidly.
The Warning icon lights
up on the keypad.
The robot lawn mower
stops temporarily in the
work area.
EN
Insu昀케cient working hours.
Cutting device with encrustations
and / or residues.
Pivoting cutting blades blocked by
encrustations or residues.
The working area is too large for
the robot lawn mower's capacity.
Batteries about to exhaust their
life cycle.
Batteries are not charged
completely.
The supply voltage is missing
or there is a fault in the docking
station.
The docking station was not set
up correctly.
There is a fault in the docking
station.
The docking station has detected
a short circuit on the charging
contacts.
It indicates anomaly / failure
conditions.
Weak GPS signal.
Extending the working hours
Par.
4.7.12).
Switch o昀昀 the robot lawn mower in safety
conditions (See Par. 2.3). Clean the
cutting device.
Switch o昀昀 the robot lawn mower in safety
conditions (See Par. 2.3). Replace the
cutting blades.
Reduce the work area (see Technical
Data Par. 1.2).
Replace the batteries with original spare
parts (See Par. 6.4).
Clean and eliminate any oxidation
from the contact points (See Par. 6.2).
Recharge the batteries.
Check that the power supply unit is
plugged in correctly. Check the integrity of
the power supply connection cable.
Set up the docking station through the
app. (See Par. 4.7.5).
Disconnect the docking station from the
mains and reconnect it after a few
minutes. If the problem persists, contact a
service centre.
Disconnect the docking station from
the mains, rectify any short circuits
and clean the charging contacts of the
docking station and the robot. Reconnect
the docking station to the mains. If the
problem persists, contact a service centre.
See the app for more information or
contact a service centre.
If the problem persists, please contact an
authorised dealer.
7. TROUBLESHOOTING
(See
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

A 3000A 5000

Table of Contents