Table of Contents
Advertisement
Procedure:
1. Press the "STOP" button (A) to open the cover (B) and access the control console (C).
2. Press the "MODE SELECT" button (F) until the icons of the functions you wish to activate 昀氀 ash. The
icons relating to the selected functions 昀氀 ash.
3. Press the "CONFIRM" push button (G). The icons of the selected functions light up steadily to con昀椀 rm
the action.
4. Close the cover (B).
5. The robot lawn mower will start working according to the set mode.
NOTE: If after pressing the "CONFIRM" button (G), the "SELECT MODE" button (F) is pressed,
the icons for the selected functions will start 昀氀 ashing again, requesting to con昀椀 rm the newly
selected function. Press the "CONFIRM" button (G). The icons return to a steady light.
NOTE: If the cover (B) is opened, either during work or with the robot in the base, the icons
relating to the selected functions will 昀氀 ash,to indicate that it is necessary to con昀椀 rm the operation
before closing the cover again. If the cover is closed without pressing the "CONFIRM" button
(G), the robot will not perform any task until a new command is given by the user.
NOTE: If the robot battery is low, the battery icon 昀氀 ashes red to indicate that the selected action
cannot be performed.
NOTE: NOTE: the robot lawn mower starts only after closing the cover (B).
NOTE: The robot lawn mower goes to the docking station with the cutting device switched o昀昀 .
A
C
D
NOTE: If after pressing the "CONFIRM" button (G), the " SELECT MODE" button (F) is pressed,
the icons for the selected functions will start 昀氀 ashing again, requesting con昀椀 rmation of the newly
selected function. Press the "CONFIRM" button (G). The icons will once again light up with a
steady glow.
NOTE: if the cover (B) is opened, either during work or with the robot in the base, the icons
relating to the selected functions will 昀氀 ash,to indicate that it is necessary to con昀椀 rm the operation
before closing the cover again. If the cover is closed without pressing the The "CONFIRM"
button (G), the robot will not perform any operation until a new command is given by the user.
46
5. OPERATION
B
I
E
F
L
G
EN
Advertisement
Chapters
Table of Contents
