CommandGrip
SPOUT SET POINT SWITCH:
Manually move the spout into the
desired position followed by
pressing and holding either button
for 2 sec.
HEADER HEIGHT AND
LATERAL FLOTATION:
Use the upper and lower
•
part of the switch to raise
and lower the header
(Used in combination
with the shift button will
operate the rear
hydraulics)
Use the left and right
•
part of the button to
adjust the lateral
flotation either clockwise
or anti-clockwise
In Cab Controls
Handle
TM
THIRD SPOUT SET POINT:
Used for moving to the
•
spout to the rear
position for rear filling.
Move the spout
manually then press
and hold the button
for 2 sec to save
Use of the button in
•
combination with the
shift button will bring
the spout to the home
position (position for
road transport)
SPOUT DEFLECTOR AND
ROTATION (SPOUT RAISE
AND LOWER):
Use the upper and
•
lower part of the
switch to raise and
lower the spout
deflector (Used in
combination with the
shift button will raise
and lower the spout)
Use the left and right
•
part of the switch to
rotate the spout
6