1.
Select "Back - Toolbox - Header"
2.
Set the correct parameters for
the current header
1. "Header width":
Header width/total
rows
2.
"Autofloat" installed:
For headers with
mobile skids/sensors
3.
"Header auto lift":
The header will raise
when driving
backwards
4.
"Header lateral tilt"
installed:
For harvesters with
hydraulic lateral float
5.
Pickup reverser
Note: With "HHC Ht Sens" and
"HHC Tilt Sens" the system reaction
agressiveness can be adjusted
(HHC needs to be active)
Header Configuration
22