New Holland FR480 Tier 4B Service Manual
  1. Manuals
  2. Brands
  3. New Holland Manuals
  4. Farm Equipment
  5. FR480 Tier 4B
  6. Service manual
New Holland FR480 Tier 4B Service Manual

New Holland FR480 Tier 4B Service Manual

Forage harvester
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SERVICE MANUAL
FR480 / FR550 / FR650 / FR780 Tier 4B (final)
FR850 Tier 2
Forage Harvester
Part number 47956032
1
edition English
st
February 2016

Advertisement

Table of Contents
loading

Related Manuals for New Holland FR480 Tier 4B

Summary of Contents for New Holland FR480 Tier 4B

  • Page 1 SERVICE MANUAL FR480 / FR550 / FR650 / FR780 Tier 4B (final) FR850 Tier 2 Forage Harvester Part number 47956032 edition English February 2016...
  • Page 2 SERVICE MANUAL FR480 Forage Cruiser Cursor 13, TIER 4B FR550 Forage Cruiser Cursor 13, TIER 4B FR650 Forage Cruiser Cursor 16, TIER 4B FR780 Forage Cruiser Cursor 16, TIER 4B FR850 Forage Cruiser Vector, TIER2 47956032 16/02/2016 Find manuals at https://best-manuals.com...
  • Page 3 Link Product / Engine Product Market Product Engine FR480 Forage Cruiser Cursor 13, North America F3HFE613H*B007 TIER 4B FR550 Forage Cruiser Cursor 13, North America F3H FE613F*B007 TIER 4B North America FR650 Forage Cruiser Cursor 16, F3JFE613A*B005 TIER 4B FR780 Forage Cruiser Cursor 16, North America F3JFE613B*B006 TIER 4B...
  • Page 4 Contents INTRODUCTION Engine..................10 [10.001] Engine and crankcase ............. 10.1 [10.218] Fuel injection system .
  • Page 5 Hydrostatic drive................. 29 [29.100] Transmission and steering hydrostatic control ........29.1 [29.218] Pump and motor components.
  • Page 6 [41.432] Autoguidance steering ............. 41.5 Wheels ..................
  • Page 7 [55.DTC] FAULT CODES..............55.21 Attachments/Headers..............
  • Page 8 INTRODUCTION 47956032 16/02/2016 Find manuals at https://best-manuals.com...

  • Page 9: Table Of Contents

    Contents INTRODUCTION Basic instructions - How to use and navigate through this Manual (*) ......3 Foreword - Important notice regarding equipment servicing (*) .

  • Page 10: Basic Instructions - How To Use And Navigate Through This Manual

    INTRODUCTION Basic instructions - How to use and navigate through this Manual FR480 Forage Cruiser FR550 Forage Cruiser FR650 Forage Cruiser FR780 Forage Cruiser FR850 Forage Cruiser Technical information This manual has been produced by a new technical information system. This new system is designed to deliver technical information electronically through Web delivery (eTim), DVD and in paper manuals.
  • Page 11 INTRODUCTION How to use this manual This manual is divided into Sections. Each Section is then divided into Chapters. Contents pages are included at the beginning of the manual, then inside every Section and inside every Chapter. An alphabetical Index is included at the end of a Chapter.
  • Page 12 INTRODUCTION 63 - Chemical applicators 64 - Chopping 66 - Threshing 68 - Tying/Wrapping/Twisting 69 - Bale wagons 70 - Ejection 71 - Lubrication system 72 - Separation 73 - Residue handling 74 - Cleaning 75 - Soil preparation/Finishing 76 - Secondary cleaning / Destemmer 77 - Seeding 78 - Spraying 79 - Planting...
  • Page 13 INTRODUCTION Section contents Section Number Description Maintenance Machine completion and equipment Engine Main gearbox and drive Clutch Transmission Four wheel drive system Front axle system Rear axle system Hydrostatic drive Implement power take-off Brakes and controls This Section covers the central parts of the hydraulic system.
  • Page 14 INTRODUCTION Number Description Section Telescopic single arm Booms, dippers and buckets Dozer blade and arm Accessories Tools This Section covers all the main functions and systems related to the body of the machine, including the Platform, cab, bodywork and decals operators cab and the platform.
  • Page 15 INTRODUCTION Chapters Each Chapter is identified by a number e.g. Hydraulic Systems - Main check valve- 35.359. The first number is identical to the Section number i.e. Chapter 35.359 is inside Section 35, Hydraulic Systems. The second number is representative of the Chapter contained within the Section. CONTENTS The Chapter Contents lists all the technical data (specifications), functional data (how it works), service data (remove, install adjust, etc..) and diagnostic data (fault codes and troubleshooting) that have been written in that Chapter for...
  • Page 16 INTRODUCTION Information units and information search Each chapter is composed of information units. Each information unit has a page reference within that Chapter. The information units provide a quick and easy way to find just the right piece of technical information you are looking for. Example information unit Main control valve - Sectional View (35.359) Information Unit SAP code...

  • Page 17: Foreword - Important Notice Regarding Equipment Servicing

    Specifications, descriptions, and illustrative material herein are as accurate as known at time of publication but are subject to change without notice. In case of questions, refer to your NEW HOLLAND Sales and Service Networks. 47956032 16/02/2016...

  • Page 18: Note To The Owner

    INTRODUCTION Note to the Owner FR480 Forage Cruiser FR550 Forage Cruiser FR650 Forage Cruiser FR780 Forage Cruiser FR850 Forage Cruiser Engine repair information: The engine repair information is not contained within this manual. For engine repair information, please refer to the respective Service Manual for the engine type used in your vehicle. Fault Code Resolution (FCR) information: For FCR information, please refer to the Electronic Service Tool (EST) or to the information given in the paper or electronic version of this manual.

  • Page 19: Safety Rules

    INTRODUCTION Safety rules FR480 Forage Cruiser FR550 Forage Cruiser FR650 Forage Cruiser FR780 Forage Cruiser FR850 Forage Cruiser Personal safety This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible death or injury. Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in- structions.

  • Page 20: Safety Rules - Ecology And The Environment

    Improper disposal of batteries can contaminate the soil, groundwater, and waterways. NEW HOLLAND strongly recommends that you return all used batteries to a NEW HOLLAND dealer, who will dispose of the used batteries or recycle the used batteries properly. In some countries, this is a legal requirement.

  • Page 21: Safety Rules

    INTRODUCTION Safety rules FR480 Forage Cruiser FR550 Forage Cruiser FR650 Forage Cruiser FR780 Forage Cruiser FR850 Forage Cruiser LEGAL OBLIGATIONS This machine may be equipped with special guarding or other devices in compliance with local legislation. Some to these require active use by the operator. Therefor, check local legislations on the usage of this machine. ACCIDENT PREVENTION Most accidents or injuries that occur in workshops are the result of non compliance to simple and fundamental safety principles.
  • Page 22 INTRODUCTION • Do not carry out repair operations with someone sitting in the driver's seat, unless the person is a trained technician who is assisting with the operation in question. • Do not operate the machine or use any of the implements from different positions, other than the driver's seat. •...
  • Page 23 INTRODUCTION Machine start-up. • Never run the engine in confined spaces that are not equipped with adequate ventilation for exhaust gas extraction. • Never place the head, body, limbs, feet, hands or fingers near rotating and moving parts. Hydraulic systems and fuel injection systems •...

  • Page 24: Personal Safety

    INTRODUCTION Personal safety FR480 Forage Cruiser FR550 Forage Cruiser FR650 Forage Cruiser FR780 Forage Cruiser FR850 Forage Cruiser WARNING Heavy object! ALWAYS use a hoist or get assistance to lift the component. Failure to comply could result in death or serious injury. W0086A WARNING Pressurized system!

  • Page 25: Basic Instructions - Shop And Assembly

    Only use CNH Original Parts or NEW HOLLAND Original Parts. Only genuine spare parts guarantee the same quality, duration, and safety as original parts, as they are the same parts that are assembled during standard production. Only CNH Original Parts or NEW HOLLAND Original Parts can offer this guarantee.
  • Page 26 W0111A Special tools The special tools that NEW HOLLAND suggests and illustrate in this manual have been specifically researched and designed for use with NEW HOLLAND machines. The special tools are essential for reliable repair operations. The special tools are accurately built and rigorously tested to offer efficient and long-lasting operation.

  • Page 27: Torque

    INTRODUCTION Torque FR480 Forage Cruiser FR550 Forage Cruiser FR650 Forage Cruiser FR780 Forage Cruiser FR850 Forage Cruiser Minimum hardware tightening torques (in N m or lb in /lb ft) for normal assembly applica- tions unless otherwise stated NOTICE: Shown below is the suggested initial torque tightening sequences for general applications, tighten in se- quence from item 1 through to the last item of the hardware.
  • Page 28 INTRODUCTION Class 8.8 in N m (lb in or lb ft) Class 10.9 in N m (lb in or lb ft) Nominal Plated nut Lock nut Hardened nut Plated nut Lock nut Hardened nut Size 1073 N·m 590.1 N·m 967.5 N·m 1486 N·m 817.3 N·m 1337 N·m...
  • Page 29 INTRODUCTION ZEIL06CS0135F0A 47956032 16/02/2016...

  • Page 30: Torque - Standard Torque Data For Hydraulic Connections

    Over-torquing of a hydraulic connection can also lead to leakage or failure. For some connections, NEW HOLLAND requires a different torque value than is listed in the ISO and SAE standards. • The torque values in this document should be used whenever possible or applicable.
  • Page 31 INTRODUCTION Torque values for metric O-Ring Boss (ORB) port connections S-Series * L-Series ** Metric Ferrous Non-Ferrous Ferrous Non-Ferrous thread N·m (lb ft) ± 10 % N·m (lb ft) ± 10 % N·m (lb ft) ± 10 % N·m (lb ft) ± 10 % M8 x 1 10.5 (7.7) 6.3 (4.6)
  • Page 32 INTRODUCTION Torque values for port connections (British Standard Pipe Parallel (BSPP) thread ports and stud ends) Metric tube Outside Diameter (OD) Ferrous Non-Ferrous mm (in) BSPP S-Series L-Series S-Series L-Series thread S-Series * L-Series ** N·m (lb ft) N·m (lb ft) N·m (lb ft) N·m (lb ft) G- Gas;...
  • Page 33 INTRODUCTION Torque values for Inch O-Ring Boss (ORB) port non-adjustable connections S-Series * L-Series ** Ferrous Non- Ferrous Non- Inch tube UN/UNF N·m (lb ft) Ferrous N·m (lb ft) Ferrous dash size thread size ± 10 % N·m (lb ft) ±...
  • Page 34 INTRODUCTION Torque values for inch O-Ring Boss (ORB) port plugs Ferrous Non-Ferrous Internal hex External hex UN/UNF N·m (lb ft) N·m (lb ft) N·m (lb ft) dash size thread size ± 10 % ± 10 % ± 10 % 5/16-24 7.5 (5.5) 12.5 (9.2) 7.5 (5.5)
  • Page 35 INTRODUCTION Torque values for four-bolt flange connections (Inch Screws, Grade 8) Code 61 Code 62 Metric size Imperial size Screw code Screw code N·m (lb ft) N·m (lb ft) ± 10 % ± 10 % 5/16-18 34 (25.1) 5/16-18 34 (25.1) 3/8-16 63 (46.5) 3/8-16...
  • Page 36 INTRODUCTION Torque values for O-Ring Face Seals (ORFS) connections Hex size Metric Swivel nut Swivel nut Inch tube (mm) UN/UNF tube dash torque torque OD (mm) (Reference thread size OD (mm) size N·m (lb ft) N·m (lb ft) only) ± 10 % ±...

  • Page 37: Basic Instructions - Chain Wear Tables - Roller Chains

    INTRODUCTION Basic instructions - Chain Wear Tables - Roller Chains FR480 Forage Cruiser FR550 Forage Cruiser FR650 Forage Cruiser FR780 Forage Cruiser FR850 Forage Cruiser Chain Wear The individual joints in a roller chain articulate as they enter and leave the sprockets. This articulation results in wear on the pins and bushings.
  • Page 38 INTRODUCTION This relationship is often useful since the normal maximum allowable chain wear elongation of 3 % is valid only up to 67 teeth in the large sprocket. In drives having fixed center distances, chains running in parallel or where smoother operation is required, wear should be limited to approximately 1.5 %.

  • Page 39: Conversion Factors

    INTRODUCTION Conversion factors FR480 Forage Cruiser FR550 Forage Cruiser FR650 Forage Cruiser FR780 Forage Cruiser FR850 Forage Cruiser Length 1 mm 0.0393 in 1 in 25.4 mm 1 km 0.621 miles 1 miles 1.609 km 0.3048 m 3.281 ft 1 ft Area 1 ha 2.471 ac...

  • Page 40: General Specification - System Protection Data

    INTRODUCTION General specification - System protection data FR480 Forage Cruiser FR550 Forage Cruiser FR650 Forage Cruiser FR780 Forage Cruiser FR850 Forage Cruiser In case of an emergency, in order to prevent the engine or the hydrostatic system damage, or to protect your personal safety, the engine will automatically be shut off, if the elements mentioned in the table below occur: NOTICE: If it is necessary to move the forage harvester for safety reasons, the engine can be (re-) started after an automatic engine shut off.
  • Page 41 INTRODUCTION 47956032 16/02/2016...
  • Page 42 INTRODUCTION 47956032 16/02/2016...

  • Page 43: Product Identification

    INTRODUCTION Product identification FR Forage Cruiser series EXPLANATION OF MACHINE SERIAL NUMBERS Example : n° 725902002 72 5902002: The first two digits identify the model within a product line: FR450 = 51 FR480 = 71 FR500 = 52 FR550 = 72 FR600 = 53 FR650 = 73 FR780 = 74...

  • Page 44: Product Identification (*)

    INTRODUCTION Product identification FR480 Forage Cruiser FR550 Forage Cruiser FR650 Forage Cruiser FR780 Forage Cruiser FR850 Forage Cruiser NOTE: Throughout this operator’s manual, references to the right-hand side and the left-hand side of the machine are determined by standing at the rear of the machine and facing the direction of travel during working operation. The following overhead view illustration is a general representation of the machine.
  • Page 45 INTRODUCTION 47956032 16/02/2016...
  • Page 46 SERVICE MANUAL Engine FR480 Forage Cruiser Cursor 13, TIER 4B FR550 Forage Cruiser Cursor 13, TIER 4B FR650 Forage Cruiser Cursor 16, TIER 4B FR780 Forage Cruiser Cursor 16, TIER 4B FR850 Forage Cruiser Vector, TIER2 47956032 16/02/2016...
  • Page 47 Contents Engine - 10 [10.001] Engine and crankcase ............. . . 10.1 [10.218] Fuel injection system .
  • Page 48 Engine - 10 Engine and crankcase - 001 FR480 Forage Cruiser Cursor 13, TIER 4B FR550 Forage Cruiser Cursor 13, TIER 4B FR650 Forage Cruiser Cursor 16, TIER 4B FR780 Forage Cruiser Cursor 16, TIER 4B FR850 Forage Cruiser Vector, TIER2 47956032 16/02/2016 10.1 [10.001] / 1...
  • Page 49 Contents Engine - 10 Engine and crankcase - 001 SERVICE Engine Remove (*) ................3 Install (*) .
  • Page 50 Engine - Engine and crankcase Engine - Remove FR480 Forage Cruiser FR550 Forage Cruiser FR650 Forage Cruiser FR780 Forage Cruiser DANGER Heavy objects! Lift and handle all heavy components using lifting equipment with adequate capacity. Always support units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders. Failure to comply will result in death or serious injury.
  • Page 51 Engine - Engine and crankcase 5. Remove the rear shield. • Support the rear shield (2). Ask the assistance of a second person or use a suitable lifting device. • Lift up the bottom clip from the gas strut (3), then remove the gas strut (3) from the pivot bolt.
  • Page 52 Engine - Engine and crankcase Drain Fluids 8. Drain the hydraulic oil reservoir. ZEIL15FR00090AA 9. Drain the engine coolant: • Engine coolant radiator ZEIL15FR00088AA • Engine coolant intake. Close the tap, remove the hose, drain coolant, open the tap and drain fluid. •...
  • Page 53 Engine - Engine and crankcase 11. Remove all the straps and disconnect all the connec- tors of the wiring harness branch (see arrow) going down of the wiring harness (6) and lay the wiring har- ness branch on top of the roof assembly. See the lo- cation diagram in the service manual.
  • Page 54 Engine - Engine and crankcase Roof assembly 16. Remove the hardware (10) (fourteen in total) and the cooling group cover plate (12). 17. Disconnect the hoses (11) from the engine coolant reservoir. ZEIL15FR00091AA 18. Remove the hose (14) from the engine coolant intake tube.
  • Page 55 Engine - Engine and crankcase 24. On the left-hand side of the machine, disconnect the DEF/AdBlue® feed line from the supply module. NOTE: Have a suitable container ready and use the appro- priate plugs on the DEF/AdBlue® supply module and the DEF/AdBlue®...
  • Page 56 Engine - Engine and crankcase 31. Support the roof assembly with a suitable lifting de- vice. Use the lifting eyes near the front hinges of the side shieldings, and use the spout support as shown. ZEIL15FR00116AA 32. On the left-hand side of the machine, remove the hardware (29).
  • Page 57 Engine - Engine and crankcase 35. On the right-hand side of the rear frame, remove the hardware (32). ZEIL15FR00121AA 36. On the left-hand side of the rear frame remove the hardware (32). ZEIL15FR00120AA 37. Remove the hardware (33). ZEIL15FR00119AA 38. Make sure nothing remains connected to the roof as- sembly.
  • Page 58 Engine - Engine and crankcase Air and coolant tubes 39. Loosen the clamp (34) of the cooling group air intake tube (35). ZEIL15FR00138AA 40. Loosen the clamp (37). 41. Remove the clamp hardware (36). Remove the air intake tube (35). ZEIL15FR00137AA 42.
  • Page 59 Engine - Engine and crankcase 48. Loosen the hose clamp (46) of the engine coolant out- let tube (43). 49. Remove the clamp hardware (45) and remove the en- gine coolant outlet tube (43). NOTE: The tube is full of engine coolant. ZEIL15FR00145AA 50.
  • Page 60 Engine - Engine and crankcase Cooling fan 56. On the fan support, remove the hardware (54) of the oil filter (53). Lay the oil filter (53) down without re- moving the hoses. ZEIL15FR00126AA 57. Remove the hardware (56) of the support (57). 58.
  • Page 61 Engine - Engine and crankcase 64. Support the fan (65). Use a suitable lifting device. 65. Remove the hardware (64) and remove the fan (65) from the machine. ZEIL15FR00129AA Hydraulics 66. Disconnect the connectors (7A), (7B), (7C), (7D), (7E), (7F) and (7G) of the wire harness (7). See also Figure 45.
  • Page 62 Engine - Engine and crankcase 69. Remove the hose (66), the hose (67), and the hose (68). ZEIL15FR00133AA 70. Remove the hose (77), the hose (81), the hose (78), the hose (79) and the hose (80). ZEIL15FR00132AA 71. Remove the clamp hardware (82). Disconnect the tube (83).
  • Page 63 Engine - Engine and crankcase Rear Frame 73. On the rear right-hand side of the machine. Remove the hardware (84). ZEIL15FR00154AZ 74. On the rear right-hand side of the machine. Remove the hardware (84). ZEIL15FR00155AA 75. On the rear right-hand side light cover (86). Remove the plastic rivet (85).
  • Page 64 Engine - Engine and crankcase 78. Ask assistance of a second person or use a suitable lifting device to support the rear frame (88). 79. Remove the hardware (89). ZEIL15FR00158AA 80. On the left-hand side of the rear frame (88). Remove the hardware (89) and remove the rear frame (88).
  • Page 65 Engine - Engine and crankcase 83. On the right-hand side of the machine, remove the hardware (90). ZEIL15FR00150AA 84. Remove the hardware (90). ZEIL15FR00152AA 85. On the left-hand side of the machine, remove the hardware (90). ZEIL15FR00151AA 86. Remove the clamp hardware (91). 87.
  • Page 66 Engine - Engine and crankcase 88. Remove the fuel feed line (95) and the fuel return line (92). 89. Remove the air-conditioning lines (93) and (96). ZEIL15FR00148AA 90. Remove the oil filter (97). ZEIL15FR00160AA 91. Make sure nothing remains connected to the engine. Remove the engine.
  • Page 67 Engine - Engine and crankcase Engine - Install FR480 Forage Cruiser FR550 Forage Cruiser FR650 Forage Cruiser FR780 Forage Cruiser DANGER Heavy objects! Lift and handle all heavy components using lifting equipment with adequate capacity. Always support units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders. Failure to comply will result in death or serious injury.
  • Page 68 Engine - Engine and crankcase Engine supports, fuel and air-conditioning lines 1. Use a suitable lifting device and position the engine on the machine. NOTE: Make sure that the chains are set in such a way that the engine, when lifted, is properly balanced. It could be difficult to install the engine, if not balanced properly.
  • Page 69 Engine - Engine and crankcase 5. On the right-hand side of the machine, install the hard- ware (90). ZEIL15FR00150AA 6. Install the hardware (90). ZEIL15FR00152AA 7. Remove the chains from the lifting eyes. ZEIL15FR00197AA 8. Install the oil filter (97). ZEIL15FR00160AA 47956032 16/02/2016 10.1 [10.001] / 22...
  • Page 70 Engine - Engine and crankcase 9. Install the fuel feed line (95) and the fuel return line (92). 10. Install the air-conditioning lines (93) and (94). 11. Install the clamp hardware (96). ZEIL15FR00148AA 12. Install the rubber elbow coupler (28) and tighten the hose clamp (27).
  • Page 71 Engine - Engine and crankcase 16. On the rear right-hand side, install the right-hand side light cover (86). Use the plastic rivets (85). ZEIL15FR00156AA 17. Install the plastic rivet (85) and the hardware (87). ZEIL15FR00157AA 18. On the rear right-hand side of the machine, install the hardware (84).
  • Page 72 Engine - Engine and crankcase Hydraulics 20. Install the tube (83). Use the clamp hardware (82), see also Figure 39. ZEIL15FR00147AA 21. Install the tube (83). Install the clamp hardware (82). ZEIL15FR00146AA 22. Install the hose (80) and the hose (79). 23.
  • Page 73 Engine - Engine and crankcase 25. Install the hose (75), the hose (76) and the hose (74). ZEIL15FR00135AA 26. Install the hose (73), the hose (72), the hose (70), the hose (71) and the hose (69). ZEIL15FR00136AA 27. Connect the connectors (7A), (7B), (7C), (7D), (7E), (7F) and (7G) of the wire harness (7).
  • Page 74 Engine - Engine and crankcase 30. Instal the tube (58) and the tube (59). See also the arrows in Figure 36. 31. Install the clamps (55). 32. Connect the hose (60) and the hose (61). 33. Install the fan drive belt (63). Tighten the fan drive belt tensioner (62) to the correct tension.
  • Page 75 Engine - Engine and crankcase Air and coolant tubes 38. Install the engine coolant inlet tube (50) between en- gine and cooling group. Use the clamp hardware (51). See also Figure 30. 39. Tighten the hose clamp (52). NOTE: Torque between 11 - 13 N·m (8.11 - 9.59 lb ft). ZEIL15FR00141AA 40.
  • Page 76 Engine - Engine and crankcase 46. Install the engine coolant outlet tube (43). Install the clamp hardware (44). 47. Tighten the hose clamp (42) of the engine coolant out- let tube (43). NOTE: Torque between 11 - 13 N·m (8.11 - 9.59 lb ft). ZEIL15FR00144AA 48.
  • Page 77 Engine - Engine and crankcase Roof assembly 54. Position the roof assembly on the machine. Use the lifting eyes near the front hinges of the side shieldings, and use the spout support as shown. NOTE: Make sure that the rubber coupler sits ready is slid back on the air intake tube (23) before installing the roof assembly.
  • Page 78 Engine - Engine and crankcase 58. Install the cooling group cover plate (12). Use the hardware (10) (fourteen in total). NOTE: If the holes do not align properly, loosen the hard- ware in the previous steps. Then adjust the position of the roof assembly and tighten the hardware.
  • Page 79 Engine - Engine and crankcase 62. Remove the chains from the roof assembly. ZEIL15FR00116AA 63. Install the rubber elbow coupler (28) on the air intake tube (23) and tighten the clamp (27) 64. Install the breather tube (26) rubber coupler on the air intake tube (23) and tighten the clamp (25).
  • Page 80 Engine - Engine and crankcase 67. On the left-hand side of the machine, connect the DEF/AdBlue® feed line to the supply module. NOTE: Have a suitable container ready and use the appro- priate plugs on the DEF/AdBlue® supply module and the DEF/AdBlue®...
  • Page 81 This as a preview PDF file from best-manuals.com Download full PDF manual at best-manuals.com...

This manual is also suitable for:

Fr550 tier 4bFr650 tier 4bFr780 tier 4bFr850 tier 2

Table of Contents