Español - Bosch Professional GBL 800 E Original Instructions Manual

8 | Español
Regulating airflow
Turn the thumbwheel (4) to set the required airflow:
– Clockwise: Increase the airflow
– Anticlockwise: Decrease the airflow
Working Advice
Ensure that the air inlet (9) cannot suck in any impurities
while blowing is taking place.
Never vacuum without a dust bag.
Do not vacuum any sharp-edged or hot materials such as
glass splinters, hot ashes or metal chips.
Empty the dust bag regularly when vacuuming. Observe en-
vironmental regulations when disposing of waste.
If the blower is not being used, close the air outlet with the
dust collection bag to prevent dirt or foreign particles from
getting into the blower housing.
The entry of solid material into the blowing section of the
housing (even during storage) can result in the ventilator
breaking and consequently lead to a rupture in the housing
while the work is being carried out.
Maintenance and Service
Maintenance and Cleaning
Pull the plug out of the socket before carrying out any
u
work on the power tool.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by an
after-sales service centre that is authorised to repair Bosch
power tools.
Replacing the carbon brushes (see figure C)
Check the length of the carbon brushes around every 2–3
months and replace both carbon brushes if required.
Never replace only a single carbon brush.
Note: Only use carbon brushes supplied by Bosch and inten-
ded specifically for your product.
– Unscrew the caps (6) using a suitable screwdriver.
– Replace the spring-loaded carbon brushes (10) and
screw the caps back on.
The criteria for replacing the carbon brushes: A dashed or
dotted line is present on one large side of the carbon brush.
If one of the two carbon brushes has been worn down to this
line, both carbon brushes should be replaced immediately in
order to protect the commutator from any potential damage.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
1 609 92A 83T | (21.04.2023)
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Malaysia
Robert Bosch Sdn. Bhd.(220975-V) PT/SMY
No. 8A, Jalan 13/6
46200 Petaling Jaya
Selangor
Tel.: (03) 79663194
Toll-Free: 1800 880188
Fax: (03) 79583838
E-Mail: kiathoe.chong@my.bosch.com
www.bosch-pt.com.my
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Disposal
The power tool, accessories and packaging should be re-
cycled in an environmentally friendly manner.
Do not dispose of power tools along with
household waste.
Español
Indicaciones de seguridad
Indicaciones generales de seguridad para
herramientas eléctricas
Lea íntegramente las advertencias
ADVERTEN-
de peligro, las instrucciones, las
CIA
ilustraciones y las especificacio-
nes entregadas con esta herramienta eléctrica. En caso
de no atenerse a las instrucciones siguientes, ello puede
ocasionar una descarga eléctrica, un incendio y/o una lesión
grave.
Guardar todas las advertencias de peligro e instruccio-
nes para futuras consultas.
El término "herramienta eléctrica" empleado en las siguien-
tes advertencias de peligro se refiere a herramientas eléctri-
cas de conexión a la red (con cable de red) y a herramientas
eléctricas accionadas por acumulador (sin cable de red).
Seguridad del puesto de trabajo
Mantenga el área de trabajo limpia y bien iluminada.
u
Las áreas desordenadas u oscuras pueden provocar acci-
dentes.
No utilice herramientas eléctricas en un entorno con
u
peligro de explosión, en el que se encuentren combus-
Bosch Power Tools