Table of Contents
Advertisement
Item
Description
2
NIC status LED
3
Health LED
4
Power On/Standby
button and system
power LED
1
When all four LEDs described in this table flash simultaneously, a power fault has occurred.
If the health LED indicates a degraded or critical state, review the system or use iLO to review
2
the system health status.
3
Facility power is not present, the power cord is not attached, no power supplies are installed,
power supply failure has occurred, or the power button cable is disconnected.
12 LFF front panel LEDs and buttons
Hitachi Advanced Server HA820 G2 User Guide
1 Hz/cycle per sec = Remote management or firmware
◦
upgrade in progress
4 Hz/cycle per sec = iLO manual reboot sequence
◦
initiated
8 Hz/cycle per sec = iLO manual reboot sequence in
◦
progress
Off = Deactivated
◦
1
•
Solid green = Link to network
•
Flashing green (1 Hz/cycle per sec) = Network active
Off = No network activity
•
1
•
Solid green = Normal
•
Flashing green (1 Hz/cycle per sec) = iLO is rebooting
•
Flashing amber = System degraded
Flashing red (1 Hz/cycle per sec) = System critical2
•
•
Solid green = System on
•
Flashing green (1 Hz/cycle per sec) = Performing power on
1
sequence
•
Solid amber = System in standby
Off = No power present3
•
Status
14
Advertisement
Table of Contents
