Symbols - Yard force EM U32 Instructions Manual

SYMBOLS

Safety symbols
The purpose of safety symbols is to attract your
attention to any possible dangers. The safety symbols
and their explanations deserve your careful attention
and full understanding. The symbol warnings do not, by
themselves, eliminate any danger. The instructions and
warnings they give are no substitute for proper accident
prevention measures.
WARNING: Be sure to read and understand
all safety instructions within this operator's
manual, including all safety alert symbols such as
"DANGER", "WARNING", and "CAUTION" before
using this tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious personal injury.
SAFETY ALERT SYMBOLS: Indicate DANGER,
WARNING, or CAUTION. May be used in conjunction
with other symbols or pictographs.
Symbol meanings
This page depicts and describes safety symbols that
may appear on this product. Read, fully understand and
follow all instructions on the machine before attempting
to assemble and operate.
10
SYMBOLS
Declaration of conformity (see chapter
"Declaration of conformity"): Products marked
with this symbol meet all the applicable
Community regulations of the European
Economic Area.
This symbol indicates that the device complies
with the protection class II.
General warning sign.
Read the operating manual.
Caution! Discharge of cuttings or stones.
Always keep the discharge flap closed.
Keep other persons and animals out of the
working range!
Warning! Rotating blade! Do not reach or step
underneath the device.
Disconnect the device from the mains before
carrying out maintenance and cleaning work.
Warning! Electric voltage.
Keep the power cable away from the rotating
blade! Do not move the device over the power
cable.
11