Related Manuals for Yard force Y2GMB41PC00
Summary of Contents for Yard force Y2GMB41PC00
- Page 1 Model Y2GMB41PC00 PETROL LAWNMOWER 125cc, 41cm Original Operating Manual Service centre: SUMEC UK Unit A&B Escrick Business Park Escrick, York YO19 6FD Helpline: 01904 727513 Email: support@yardforce.co.uk www.yardforce.co.uk...
-
Page 2: Table Of Contents
Y2GMB41PC00 Operating Manual TABLE OF CONTENTS Description of Product Parts Technical Specifications Intended Use Safety Information Assembly Adjustment Operation Storing and Maintenance Troubleshooting Declaration of Conformity Read this manual carefully prior to assembling and operating the lawnmower. It is dangerous to operate this product without being familiar with these instructions. -
Page 3: Description Of Product Parts
DESCRIPTION OF PRODUCT PARTS DESCRIPTION OF PRODUCT PARTS Check the box content Fig 1 As shown in Fig 2 Fig 2 A. Main mower deck (with upper handle) B. Lower handle C. Grass bag D. Accessories E. Manual As shown in Fig 1 WARNING: If any parts are damaged or missing, do not operate this tool until Engine-B&S 300 the missing parts are replaced. -
Page 4: Technical Specifications
TECHNICAL SPECIFICATIONS SAFETY INFORMATION Reading and storing the instruction manual Item No. Y2GMB41PC00 Engine type Single cylinder 4-stroke This instruction manual accompanies this lawnmower. It contains important information on start-up and handling. Before using the Engine displacement 125cc lawnmower, read the instruction manual carefully. This particularly applies for the Engine power 1.8 kw... - Page 5 SAFETY INFORMATION SAFETY INFORMATION • refuel outdoors only and do not smoke while refuelling; Hot surfaces will burn fingers or palms. • add fuel before starting the engine. Never remove the cap of the fuel tank or add petrol while the engine is running or when the engine is hot; •...
-
Page 6: Assembly
SAFETY INFORMATION ASSEMBLY Install the handle • Before clearing blockages or unclogging the chute; • Before checking, cleaning or working on the lawnmower; Attach the lower handle onto the unit by using one bolt and one hand tension knob on •... -
Page 7: Adjustment
ASSEMBLY ADJUSTMENT Install the grass bag Setting the cutting height Attach the grass bag to the frame by fixing all plastic hooks.(see Fig.6) Lift the safety flap with one hand and hook in the grass bag. (see Fig.7) CAUTION! The blade can cause serious injury. Before adjusting the mower height, Release the ejector flap to secure the grass bag in position. -
Page 8: Operation
OPERATION OPERATION Checking the engine oil level and filling with engine oil.(see Fig.9) Filling with engine fuel(see Fig.10) Fig 9 Fig 10 CAUTION! The following procedures and adjustments must be performed before the CAUTION! Always use clean, fresh unleaded petrol. Purchase fuel in quantities that engine is started. - Page 9 OPERATION OPERATION STOP! Once the engine is running, put the starter rope into the rope guide. Do not start the engine before putting 500ml of SAE 30 oil into the engine. Release the engine start/stop lever, it will return to its initial position, the engine will Failure to do so will result in irreparable damage to the engine and invalidate automatically switches off.
-
Page 10: Storing And Maintenance
OPERATION STORING AND MAINTENANCE Do not remove grass debris in the mower casing or on the blade by hand or with your WARNING! Before performing any maintenance or cleaning work, switch off the feet. Instead use suitable tools such as a brush or broom. engine and wait until the blade has come to a stop. -
Page 11: Replacing The Blade
STORING AND MAINTENANCE STORING AND MAINTENANCE the dipstick is rested on the filler pipe, the oil level must be between the min and max Inspect the blade adaptor on any signs of damage. marks on the dipstick. Fit a new blade, locate the blade on the two studs on the blade flange and then replace Start the engine and allow it to run briefly. -
Page 12: Maintenance Schedule
STORING AND MAINTENANCE STORING AND MAINTENANCE Maintenance Schedule Failure due to lack of routine maintenance. Failure as a result of not using the equipment in accordance with the manual and Performing routine maintenance correctly on your lawnmower will ensure you get years of safety instructions. -
Page 13: Troubleshooting
Faults which cannot be rectified with the aid of Description:Petrol Lawnmower following table may be rectified by a specialist company only (customer service Model No.Y2GMB41PC00 centre). Function: Lawn mowing Please be aware that any improper repairs will also invalidate the warranty and additional costs may be incurred.
Need help?
Do you have a question about the Y2GMB41PC00 and is the answer not in the manual?
Questions and answers