Hearth & Home Heat Wrap HW8040 Installation Instructions

Fireplace insulation blanket

Models:

HW8040 Heat Wrap

This Heat Wrap™ Fireplace Insulation Blanket has been tested for use with speciﬁ c Hearth & Home Technologies ﬁ replaces

and is listed as a ﬁ replace part. Check with your local building code agency before you begin installation to ensure compli-

ance with local codes, including the need for permits and follow-up inspections. If you encounter any problems regarding

code approvals, or if you need clariﬁ cation of any of the instructions contained here, contact your Hearth & Home Technolo-

gies Inc. dealer. For the dealer nearest you, please visit www.hearthnhome.com.

Sharp Edges

•

Wear protective gloves and safety

glasses during installation.

Fire Risk

• Must maintain 1/2 in. air space to combustible

materials.

Note: An arrow ( ) found in the text signiﬁ es change in content.

Hearth & Home Technologies Inc. • HW8040 • 18121 Rev C • 05/07

CAUTION

WARNING

Installation

Instructions

Table of Contents

Need help?

Do you have a question about the Heat Wrap HW8040 and is the answer not in the manual?

Page 1 Installation Instructions Models: HW8040 Heat Wrap This Heat Wrap™ Fireplace Insulation Blanket has been tested for use with speciﬁ c Hearth & Home Technologies ﬁ replaces and is listed as a ﬁ replace part. Check with your local building code agency before you begin installation to ensure compli- ance with local codes, including the need for permits and follow-up inspections.
Page 2 80 in. (203 cm) Note: Compression (bunching and packing) of the insulation Shipped Length may reduce its ability to perform its intended use. 40 in. 2 in. (5.1 cm) of Heat (102 cm) Wrap to overlap top Shipped of fireplace Length Edge of Heat Wrap to front edge of fireplace...