6. Your smartphone can now receive calls from your videophone.
GB19
4. The UID of your monitor should appear. Click on it.
5. Enter the name you wish to give your device, the username, the
password (it must match the password entered during initial
setup) and the door number (= channel number) you wish to
control. You will be asked for the password every time you wish to
open your electric strike plate or gate from the application.
Warning:
If you choose 1 for the channel number, you may only
control the electric strike plate.
Click on Save.
WelcomeEye Connect Pro / V5
3. Click on device connected to the
network, then conn. dev. Make sure that
the smartphone is connected to the
same WiFi network as the monitor.