Table of Contents
Advertisement
: This symbol indicates a risk of electrical shock or short-circuiting.
- Only use this product with electrical current in the following ranges: 100-240 volts and
50-60 hertz. Never attempt to use this device at a different voltage.
- Ensure that all the system's electrical connections conform to the instructions for use.
- In commercial establishments, ensure that you adhere to the electrical installation
accident prevention regulations.
- In schools, training facilities, workshops, etc. qualified personnel must be on hand to
monitor electronic equipment operation.
- You must follow the instructions for use of any other devices connected to the system.
- Please contact an experienced person if you have any doubts regarding equipment
operation or safety.
- Never plug in or unplug electrical equipment with wet hands.
- When installing this product, check that the power supply cables are not at risk of being
damaged.
- Never replace damaged electrical cables yourself! In this case, remove them and call an
expert.
- The mains supply should be located close to the device and must be easily accessible.
- An easily accessible cut-off system (switch disconnector, circuit breaker, equivalent
system) must be integrated into the building's wiring installation for the equipment
connected to the power grid.
- Keep a minimum distance around the device to guarantee sufficient ventilation.
- Ventilation should not be blocked by covering the ventilation opening with an object such
as a newspaper, tablecloth or curtain, etc.
- No open flame source such as a burning candle must be placed on the device.
- Respect the product's operating temperature.
- The device must not be exposed to liquid flow or splashing. Do not place any objects filled
with liquid such as vases on the device.
14. FCC/CE WARNING
Note:
This equipment has been tested and found to be compliant with the limits of a Class
B device, according to European standards in force. These limits are designed to provide
reasonable protection against interference in a residential installation. This equipment
uses and may emit radio frequency energy and, if not fitted and used according to the
instructions, may cause interference to radio communication.
There is no guarantee, however, that interference will not occur in a particular system. If
this equipment causes interference to radio or TV reception, which can be established by
starting and stopping it, users are encouraged to try to correct the interference by one of
the following methods:
• Increase the distance between the equipment and the receptor
• Connect the equipment to a socket belonging to a different circuit from the one to which
the receptor is connected
15. DECLARATION OF CONFORMITY
The undersigned, CFI-Extel, declares that the WelcomeEye radioelectric equipment
complies with the 2014/53/EU directive. The full text of the EU declaration of conformity
is available at the following address: www.cfi-extel.com.
WelcomeEye Connect Pro / V5
GB28
Advertisement
Table of Contents
