Table of Contents
Advertisement
Chapter 3. Installation
This pin can be connected to a +12VDC trigger output or
switched AC outlet (using a small wall-mount power supply)
on A/V equipment, current sensors, light sensors, etc.
Connect the SENSE and GROUND terminals to the output
and ground connections on the connected device. The ON
state sense voltage is 3VDC – 20VDC. The OFF state sense
voltage is 0VDC - 2VDC.
CONNECTING THE ANTENNA
Connect the included antenna directly to the BNC connector
on the RP-1. Do not attempt to locate the antenna away from
the RP-1, or connect multiple antennas to the RP-1.
9
Advertisement
Table of Contents
