Connection Options - RTI RP-1 Operations & Installation Manual

RP-1 CONNECTION OPTIONS
The following diagram shows the most common connection
scenarios. There are also many other connection possibilities and
devices that can be controlled.
RP-1 Power Supply
IR Emitter Connecting Block
To IR receivers on A/V equipment,
Model RP-1
Remote Control Processor
STATUS
PWR
The RP-1 output can power up
to ten IR emitters directly
(More than ten emitters requires an
amplified connecting block)
INPUT
(Industry Standard)
EMITTERS
lighting controls, etc.
Chapter 2. Introduction
RF DATA
USB
To +12VDC trigger
output, wall transformer
connected to a switched
outlet, current sensor, etc.
5